Featured
Products
Butler
Performance Electronic Fuel Injection Kits
click
here
Complete
Kits starting at $3,495.00
With EVERYTHING you need for an EFI conversion
Kit includes:
F.A.S.T. XFI fuel injection system
E.F.I. Fuel Pump w/filter and regulator
Sensor
Kit
4 barrel throttle body
Fuel Rails
Edelbrock EFI ready intake
(EDL-50565 or EDL-29575
Intakes)
Injectors
Complete wiring harness
Ready to run fuel and timing maps available for many applications
(so the EFI novice can bolt this kit on and be ready
to run)
Can be used with Edelbrock's
EFI ready intakes or we can do
an EFI intake conversion on the intake of your choice (including sheet
metal)
ASK
ABOUT EFI READY GAS TANKS AND FUEL CELLS
Check
out our full line of Balanced Rotating Assemblies using Cast,
Forged, or Billet Cranks. We have Stroker Kits for ANY
Pontiac engine and ANY application. If you don't see what you need
on our list, contact us and we'll put it together for you. We can
do ANY bore size as well as Dish or Dome pistons for
any compression ratio desired. We do rotating assemblies for Street
to naturally aspirated high RPM Race Engines, as well
as combos for nitrous, blower and turbo engines. Call or email
with any questions or to place your order.
NEW
PERFORMANCE CAST IRON HEAD PACKAGE
$1,395.00
BUTLER
PERFORMANCE / EDEL.CNC WIDE PORT HEADS IN STOCK
CLICK FOR PICS AND PRICING
Butler Performance
Evac Pump Kit
Vacuum Pump
and Drive Kit. Produces Crank Case Vacuum to Improve Ring Seal, Prevent
Blow By and Leaks, and Reduces Intake Charge Contamination
click HERE
for more listings and pictures
|
BPI-EVAC
|
Complete
Evac Pump Kit w/push in valve cover breather & rubber hose from
valve cover to pump
|
$549.00
|
|
BPI-EVAC-10
|
Complete
Evac Pump Kit w/ -10 AL. weld-in valve cover bung and all braided
hose/AN fittings from valve cover to pump
|
$599.00
|
|
MOR-22635
|
Moroso
-12 baffled screw-in valve cover fitting for above kit w/ -12
hose/fittings
|
add
$39.00
|
|
BPI-EVAC-MOR3V
|
Evac
Kit With 3 Vane Moroso Pump & 3 or 4-Bolt Drive Mandrel
|
$849.00
|
|
BPI-EVAC-MOR4V
|
Evac
Kit With 4 Vane Moroso Pump
|
CALL
|
|
BPI-CDR
|
Crankshaft
Drive Mandrel-drilled for 3 or 4 bolt balancers - 5/8" shaft
|
$95.00
|
|
BPI-MOR-BKT
|
Pontiac
Moroso Vacuum Pump Bracket- Mounts to Cyl. Head
|
$49.00
|
|
Pulleys
for BPI-CDR
|
Pulleys
avail. in 1/4" increments from 2" to 4"
|
$15.00/$19.00
|
SHAKER HOOD BREATHER FOR PONTIAC TRANS AMS
WFO-1
|
Drop base
shaker hood assembly for use with edelbrock rpm intake for
'77 to '79 Trans Ams to locate shaker hood scoop back
to stock height
|
$198.00.
|
WFO-2
|
Drop
base shaker hood assembly for use with edelbrock rpm intake
for '70 to '76 Trans Ams to locate shaker hood scoop
back to stock height
|
$198.00.
|
Butler
Performance Aluminum Valley Pan
with PCV valve provision
We
have our valley pan custom made from Billet Aluminum to provide the
strength and durability you need when dealing with Pontiac engines.
The Valley Pan's come with cork gasket, grommet and all necessary
bolts.
|
BFA-AVP-1
|
Aluminum
Valley Pan with grommets,
gaskets and bolts - NEW Double Baffle
Design incorporated in PCV provision to eliminate oil
consumption through PCV valve
|
$79.00
|
|
BFA-AVP2
|
Aluminum
Valley Pan W/O PCV w/Bolts & Gasket -
Not for Use with EGR Intakes
|
$69.00
|
These
valley pans are required to clear many solid roller lifters and all
hyd. roller lifters
Low
Rise 2 x 4 Dual Plane Aluminum Intake & Accessories
|
PART
#
|
DESCRIPTION
|
PRICE
|
|
EDL-5450
|
Low Rise 2 x 4 Dual Plane Aluminum Intake. (Cannot be used with
HEI)
|
$329.00
|
|
EDL-54501
|
Polished Low Rise 2 x 4 Dual Plane Aluminum Intake. (Cannot
be be used with HEI)
|
$445.00
|
|
EDL-7094
|
Edel.
2X4 Throttle Linkage (for #5450)
|
$55.00
|
|
EDL-4237
|
Edelbrock
Elite Series 2 X 4 Air Cleaner
|
$125.00
|
|
EDL-8091
|
Dual
Quad Fuel Line For Edelbrock Carbs (int. #5450)
|
$55.00
|
|
|
Pontiac
Alternator Relocation Kits
These
kits come with all the belts and brackets you need to move that alternator
to either side of the block where it is out of your way!
*GREAT
WHEN USING ELECTRIC WATER PUMPS*
|
TPR-ALT1
|
Driver
Side Alternator Relocation Kit (NO P/S)
|
$85.00
|
|
TPR-ALT2
|
Passenger
Side Alternator Relocation Kit(NO A.C.)
|
$85.00
|
IMAGE SHOWN
WITH ALTERNATOR RELOCATION KIT AND EVAC PUMP KIT INSTALLED |
Complete Pontiac Engine Accessory Bolt Kit
|
TST-6-5201
|
Complete
Engine Accessory Bolt Kit-Hex Head- Stainless Steel - click
here for our complete list of FASTENERS
|
$48.00
|
Polished
Billet Aluminum Fuel Pump Block Off Plate-Ball Milled
$19.00
|
MRG-9126G
|
Polished
Billet Aluminum Fuel Pump Block Off Plate-Ball Milled
|
$19.00
|
NEW
LOWER PRICES ON ALL DOUG'S HEADERS
click here
Performance Dampers
|
PBO-PB1056N
|
Pontiac
68-79 (except 301) Stock Replacement Balancer /4-bolt
|
$55.00
|
|
PBO-PB1056SS
|
Pontiac
68-79 (except 301) SFI Balancer/ 4-Bolt
|
$159.00
|
|
PBO-PB1056ST
|
Performance
Street Balancer 4-Bolt - 1968 & Up Pontiac(except 301)
|
$89.00
|
Butler
Performance Valve Cover Gaskets
A
Butler Performance Exclusive
"thickest valve cover gasket available"
|
SPM-11765
|
5/16"
thick high density pontiac valve cover gaskets (set)
|
$15.00
|
Aluminum
Valve Covers
Click HERE for pictures of NEW LOGO
|
Part #
|
Description
|
Price
|
|
BFA-PON-VC1
|
Tall
or Short Valve Covers
with Stainless Steel Bolt Kit.
|
$298.00
|
|
POLISH
|
Polished
|
ADD $100.00
|
Butler
Performance Headgaskets
A Butler Performance Exclusive
The strongest traditonal pontiac headgasket made. This is a low cost
way to add durablity to your engine by eliminating head gasket faliure.
We have sold thousands of these gaskets
$40.00 a set - click HERE
for listing
New Pontiac Timing Set
This
is the highest quality timing set on the market today!! Heat Treated
Billet Steel Gears -9 Keyway Crank Sprocket - 8 deg. retard or advance
in 2 deg. increments. Also available in .005 and .010 shorter for
line honed and line bored blocks.
|
|
|
JPP-5614
|
Billet
Gear Timing Set
|
$79.00
|
|
JPP-5614LB-5
|
Timing Set for .005 shorter
|
$79.00
|
|
JPP-5614LB-10
|
Timing Set for .010 shorter
|
$79.00
|
|
- Covers
25 years of Pontiac V-8 engine production
-
Covers mild to wild performance applications to all-out performance
build-ups.
Have
you been searching for a book dedicated strictly to Pontiac
performance?
Look no further
- How to build Max-Performance Pontiac V-8's
is the one you need. From the 287 to the mighty
455, from the Tempests to Tri-Powers, this book covers it all.
|
|
BPG-SA78
|
$18.99
|
Gift
Certificates also available. Call or email to purchase.
HOME
| PRODUCTS | SERVICES
| CONTACT
| CARS | ENGINES
& ASSEMBLIES
| HEADS
| NEW PRODUCTS | FEATURED
PRODUCTS | ENGINE
GALLERY
|
FAQ/TECH
