Home - Return to Previous Page
Click on image to zoom

Butler Edelbrock Rd-Port, 87cc, Hyd. FT. Top End Package BPI-TEP-RD-87FT

Compare to Edelbrock 2057 Power Package

BPI-TEP-RD-87FT
Estimated @ 471hp 530 lbs/ft*. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain, Performance Fasteners, and more make this kit an easy choice for Butler Performance Power.
Pricing: $4,349.00

Customize Your Item

- Choose your cam option -
 * required
- Choose Your Head -
 * required
- Choose Your Intake -
 * required
- Choose your Rocker Arms -
 * required
- Choose Your Timing Set -
 * required
Qty:
Free Shipping!

Description

Butler Performance Top End Kits

Complete top end kit with almost everything you need to upgrade your normal Pontiac to a Butler High Performace Pontiac. These combinations have been used in Butler Performance builds for many years and have powered some of the highest performing Pontiac engines in the world. We now offer these kits to take the guesswork out of piecing together a good combination that works well together. All these kits are actual build kits used in our shops. If its on here we use it in our own shop!!

 

Edelbrock 61529 Complete Heads

The CNC machined chamber results in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-1970 Ram-Air IV Pontiac Cylinder Head.

  • Cylinder Head Specifications:
  • Combustion chamber volume: 87cc
  • Intake runner volume: 215cc
  • Exhaust runner volume: 175cc
  • Intake valve diameter: 2.11"
  • Exhaust valve diameter: 1.66"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.46"
  • Valve spring maximum lift: .575"
  • Rocker stud: 7/16"
  • Guideplate: Hardended steel
  • Pushrod diameter: 5/16"
  • Valve angle: 14°
  • Exhaust port location: Stock Ram Air IV
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

 

Edelbrock 7156 Performer RPM Intake- CNC Port Matched

Ports CNC machined to match head port size. Maximum high-rpm power while maintaining good throttle response for street. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications.


Camshaft Options- Butler/ Comp Custom Grinds

BP6011SP

256/268, 212/218, .447/.455, 112 Hyd.

BP6012SP

262/270, 218/224, .462/.470, 112 Hyd.

BP6013SP

268/280, 224/230, .477/.480, 112 Hyd

BP6014SP

274/286, 230/236, .488/.491, 112 Hyd

Butler Exclusive COMP 852B Lifters- (Hy-lift Johnson/Made In The USA)

.842" diameter; 97g weight; 2.05" seat height Patented orifice metering valve precisely meters oil to the rocker arms Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads

Intake Option- Port matched to the heads

7156 Performer RPM- Dual Plane with broader power curve. IN our experience this is the most versatile street/performance intake on the market. 7/8 taller than stock. (requires drop base for Shaker applications)

5056 Torker II- Single Plane with slightly more top end/peak hp. Slightly lower torque curve off idle. .250 taller than stock. 

JPP Timing Chain

Pontiac Pro Billet Timing Set, Double Roller, Billet Gears, 9 Keyway Crank Sprocket w/ Seamed Chain

Fasteners & Gaskets

ARP Pontiac Head Bolt Kit For Edelbrock RD-PORT/Performer Cylinder Heads

Intake ManifOld Bolt Kit

5/16" Cork/Rubber Valve Cover Gaskets

RD-Port Reinforced Exhaust Gaskets

Pontiac Fel-Pro Standard Intake Gasket / Includes Heat X-Over Block Off

B.P.’s exclusive headgaskets, same as used in Butler Performance engines

Pushrods & Pushrod Checker

We include a pushrod length checking tool in each kit for measuring proper pushrod length. Because brands of lifters and rockers require different pushrod length.

Rockers

We offer many style rockers to choose from. Rockers that will work for these kits include stainless steel or aluminum from brands such as Comp, Scorpion, PRW, Crower, and more.

We recommend 1.5 ratio rockers so that pushrod slotting is not neccessary.

Compression Ratio Numbers for Reference (Compression ratio with Block, Head, and Stroke with -8cc FT)

400 Block Head cc w/-8cc Flat top
Stroke Bore 72cc 87cc
3.750" 4.155" 10.38 9.02
  4.181" 10.48 9.11
4.000"

4.155"

11 9.55
  4.181" 11.12 9.65
4.210" 4.155" 11.53 10
  4.181" 11.65 10.1
4.250" 4.155" 11.63 10.09
  4.181" 11.75 10.19
4.500" 4.155" 12.25 10.62
  4.181" 12.38 10.73

 

455 Block Head cc w/-8cc Flat top
Stroke Bore 72cc 87cc
4.000"

4.181"

11.12 9.65
  4.211" 11.25 9.76
4.210" 4.181" 11.65 10.1
  4.211" 11.78 10.22
4.250" 4.181" 11.75 10.19
  4.211" 11.89 10.31
4.500" 4.181" 12.38 10.73
  4.211" 12.53 10.86

Click Here for our compression calculator for other variations such as bore, gasket thickness, decking, and piston types and volumes

 

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 80.0 lbs.
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.