Home - Cylinder Heads / Top End Kits - Pontiac Cast Iron Cylinder Heads and Services
Click on image to zoom

Pontiac Cast Iron Cylinder Heads, Ported (Pair)

CC-00155
  • 6X Heads (other numbers available)
  • Milling optional / additional charge (let us know your desired compression ratio) 
  • Completely ported and polished (starting @ 240+ cfm)
  • Competition 3 angle valve job done with our Serdi machine
  • FULL bronze guides (not liners)
  • Ferrea Stainless Steel valves
  • Surfaced on all 3 sides
  • Retainers & HD valve locks
  • Tall dual springs
  • New 5/16 guide plates
  • 7/16 rocker arm studs
  • HP valve seals
  • Blue printed and assembled per application
  • Comes with Blueprint and spec sheets.
Please Call for Availability
(866)762-7527

Description

Pontiac Cast Iron Cylinder Head

 After years of extensive R&D both on the flow bench and on our track, we have developed some of the best performing round port and D-port cast iron Pontiac cylinder heads ever. These heads can be ported for optimum performance on a 450 HP street engine or a 700+ HP racing engine, and everything in between. We have ported D-Port heads that run low tens in 3,700 lbs. stock suspension street GTO's to heads that run 8.50's in a 2,400 lbs. bracket car. We also specialize in porting RAII, RAIV, H.O. and S.D. round port heads.

The port work includes fully ported intake and exhaust ports, deburred chambers, pushrod holes elongated for 1.65 rockers, and removal of excess casting material in oil drain back areas. We can use your heads or we can provide cores. We keep most casting numbers in stock.
(Core charges vary with casting numbers-call for availability.)

A valve job is highly recommended after porting, even if your heads have been recently worked. BP can do the port work only or port work and valve job combination. Your heads will be completely built and returned ready to bolt on. All BP heads come with a blueprint sheet and flow chart.

 

Performance Cast Iron D-Port Head Package

  • 6X Heads (other numbers available)
  • Milling optional / additional charge (let us know your desired compression ratio) 
  • Completely ported and polished (starting @ 240+ cfm)
  • Competition 3 angle valve job done with our Serdi machine
  • FULL bronze guides (not liners)
  • Ferrea Stainless Steel valves
  • Surfaced on all 3 sides
  • Retainers & HD valve locks
  • Tall dual springs
  • New 5/16 guide plates
  • 7/16 rocker arm studs
  • HP valve seals
  • Blue printed and assembled per application
  • Comes with Blueprint and spec sheets.


Image for display purposes only

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 70.0 lbs.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.