- Home »
- Catalog »
- Crate Engines and Builder Kits »
- Build Yours Like Butler »
- 500hp+ Pontiac EFI Muscle Car Engine on Pump Gas
500hp+ Pontiac EFI Muscle Car Engine on Pump Gas
Pontiac V8 500hp+ Pontiac EFI Muscle Car Engine on Pump Gas
Fuel Injection Without the Fight — 500hp+ Pontiac EFI Muscle Car Engine on Pump Gas for Pontiac V8s
This is the same 500hp+ pump gas Pontiac Butler builds for muscle cars, specified with self-tuning EFI instead of a carburetor. The foundation is a 400 block at 460-467 cu. in. on a 4.250" stroke, topped with Edelbrock D-port aluminum heads and a Holley Sniper throttle body that looks like a Quadrajet from three feet away.
The list covers the rotating assembly, heads, hydraulic roller valvetrain, Hyperspark ignition, oiling, sealing and the whole supporting cast of Pontiac-specific brackets, tubes, seals and bolt kits that an EFI conversion still needs.
Browse 500hp+ Pontiac EFI Muscle Car Engine on Pump Gas Products
Description: Pontiac 3.00" main 1-piece dual-lip Viton rear main seal. CRANKSHAFT MUST BE REMOVED to install — for in-car repair order 2-piece BOP-RMS01. Fits 1959-79 326-400 and 1979-81 265/301 (early 347/370 when trimmed).
Item #: BOP-RMS18
Condition:
New
Price: $59.95
No Image Available
Description: Pontiac polymer distributor gear, .500" shaft, for roller cams. For MSD, Pertronix (non-HEI), Holley (incl. HyperSpark) and FAST only. Factory GM HEI, Pertronix HEI, points, Mallory, TSP and...More Details »
Item #: BOP-PDG38
Condition:
New
Price: $149.95
Description: Send us your heads to have them Butler Built
Item #: CC-00157
Condition:
New
Please Call for Availability
Ships in 12-14 Weeks
Description: Butler built Pontiac D-Port Factory Cast Iron Cylinder Heads
Item #: CC-00156
Condition:
New
Please Call for Availability
Ships in 12-14 Weeks
Price: $6.15
Description: This valley pan is a reproduction of a stock 2-piece design for 1968 and up (for use with non-EGR intakes only) that has been modified to clear all solid & hyd roller lifters **Not for Use w/ EGR...More Details »
Item #: TPP-TP-041-S
Condition:
New
ETA- 5-7 Business days
Price: $159.95
Description: 5/16" Thick High Density Pontiac Valve Cover Gaskets (Set)
Item #: SPM-11765
Condition:
New
Price: $22.95
Description: Butler Exclusive 61-79 Pontiac V-8 storage cradle. Choose with or without wheels
Laser cut and powder coated for durability
Includes mounting hardware to block.
Exact cradle that ships with all...More Details »
Item #: BPI-9101/9111
Condition:
New
Price: $134.95
Description: Butler Performance Paddle Wheel UPgraded Pro Series 80psi oil pump with hardware
Item #: BPI-M54F-PRO-PW
Condition:
New
Price: $299.95
Description: Pontiac 69-77 Stainless Water Pump Divider Plate
Item #: BPI-1061S
Condition:
New
Price: $40.95
Description: Butler Performance Pro Series 80psi oil pump with hardware
Item #: BPI-M54F-PRO
Condition:
New
Price: $229.95
Description: Install on a new timing cover or upgrade/refresh your current timing cover
Item #: BPI-Kit-TC-INSTALL
Condition:
New
Price: $99.95
Description: Installation kit includes Pontiac valley pan gasket, grommet, PCV Valve, and bolt kit with two sealing washers
Does not fit the APE-N178WD
Item #: BPI-Bolt-Kit-VP-TPP-041S
Condition:
New
Price: $39.95
Description: Steel 4-Bolt Main Caps for Pontiac 350-389-400 with Dowel Pins(Set of 3) by Butler Performance CNC Shop *BLOCK MUST BE ALIGN BORED*
Item #: BPI-BP400C
Condition:
New
Price: $349.95
Description: Pontiac Cam Bolt Grd. 8 1/2" X 1" fine thread
Item #: BPI-CAM-1/2
Condition:
New
Price: $3.95
Description: Pontiac Camshaft Thrust Plate
Item #: APE-N532
Condition:
New
Price: $27.95
Description: Complete Engine Accessory Bolt Kit-Allen Head- Stainless Steel, 10 Sets per Kit, 131pc
Item #: ABO-A-5201
Condition:
New
Price: $89.95
Sale: $79.95
Save: 11%
Save: $10.00
Description: Complete Engine Accessory Bolt Kit-Hex Head- Stainless Steel, 10 Sets per Kit, 131pc
Item #: ABO-H-5201
Condition:
New
Price: $89.95
Sale: $79.95
Save: 11%
Save: $10.00
Description: Pontiac Crank Bolt Grd.8- 5/8"-18 X 1 3/4"
Item #: BPI-CRK-5/8
Condition:
New
Price: $4.95
Description: Pontiac Head Bolt Kit With Accessory Studs for Pontiac D-port Heads - 1967 & Later (Will Not Work With Edelbrock heads)
Item #: ITU-13372
Condition:
New
***Not a Direct Replacement/SEE PART # ARP-190-3607***
Price: $127.95
Description: Pontiac fuel pump eccentric
Item #: AAU-N536B
Condition:
New
Price: $41.95
bca-7109
Description: Pontiac Pilot Bearing
Item #: BOP-PPB126
Condition:
New
Price: $19.95
Description: Steel Distributor Clamp
Item #: BPI-DS-5
Condition:
New
Price: $15.95
Description: Pontiac Timing Chain Cover Alignment Sleeves (Set)
Item #: AAU-N538S
Condition:
New
Price: $5.95
Description: Pontiac Stainless Sleeves for Timing Cover to Water Pump 1969-'79, Each
Replaces GM part # 9796347
Item #: BPI-1060S
Condition:
New
Price: $34.95
Description: Pontiac Steel Sleeves for Timing Cover to Water Pump 1969-'79, Each
Replaces GM part # 9796347
Item #: BPI-1060
Condition:
New
Price: $21.95
Description: 1969-1979 PONTIAC TIMING COVER-11 Bolt 350-455. *BEST QUALITY* THIS IS AN EXACT DIECAST MOLD REPRODUCTION OF THE OEM GM TIMING COVER
Item #: AAU-N538
Condition:
New
Price: $189.95
Description: PROUDLY MADE IN USA. Flywheel used in our Butler engines.
Item #: BPI-FW-NB
Condition:
New
Price: $359.95
Description: Clevite77 Main Bearings for 350, 389, and 400 cu in Blocks - std
Item #: C77-MS-496P-STD
Condition:
New
Price: $156.47
Description: Complete Holley Hyperspark Kit. Includes Pontiac #565-314 Hyperspark plug and play Distributor, 8.5mm Plug Wires, Hyperspark EFI Ignition Box and Coil. Your choice of Black or Red Plug Wires, and Cap. Includes Wire Separators
Item #: HLY-EFI-DIST-KIT-HYPER
Condition:
New
Price: $1,062.95
Popular Brands:
-
-
-
-
Driven
-
Edelbrock
-
Federal Mogul
-
Fel-Pro
-
Flowkooler
-
GM Performance
-
-
IMI Performance Products
-
Johnson Lifters
-
March Performance
-
Melling
-
Milodon
-
Mr Gasket
-
MSD Performance
-
NGK
-
Powerbond
-
Ram Air Restorations
-
Ram Clutches
-
Ross Racing Pistons
-
RPC
-
Scat Crankshafts
-
Scorpion
-
SD Performance
-
Smith Brothers
-
TCI Automotive
-
Total Seal
-
Wix
More About 500hp+ Pontiac EFI Muscle Car Engine on Pump Gas
1. What This Build Is, and Who It Suits
A 467 cu. in. Pontiac on a 400 block with self-tuning electronic fuel injection, built around 9.5 compression so it lives on pump gas. It is aimed at the owner who drives the car, in traffic and in weather, and is tired of choking a carburetor on a cold morning or re-jetting for altitude.
| Why EFI here | cold starts, part-throttle drivability and a consistent air-fuel ratio, without giving up the look of a carbureted engine bay. |
| Self-tuning | the Holley Sniper system learns as you drive and comes with a handheld monitor, so a laptop is not a prerequisite. |
| Same bottom end as the carbureted build | the difference is the induction, the ignition and the fuel supply, not the short block. |
2. The 467: 400 Block, 4.250" Stroke
The rotating assembly is Butler's balanced 460-467 cu. in. stroker package for the 400 block, available as a finished balanced assembly or as a build-your-own kit if your machinist is handling assembly.
| Crank | a Scat or Eagle 4340 forged 4.250" stroke crank, 3.00" main, 2.200" big-block Chevy rod journal, or a new cast crank for a street engine without power adders. |
| Pistons | Butler/Ross forged flat tops in a 4.181" bore, with an offset ring support version for early 400 blocks with deep notches. Custom dish pistons can be milled to a compression target if your heads call for it. |
| Rods and rings | 6.800" bushed full-float rods, pin fitted, with Total Seal Classic Race rings and clearance-selected bearings. |
| Block caution | Butler does not recommend a 4.250" stroke on 557-casting blocks, and suggests holding those to 4.000" stroke and under 500 hp. |
3. D-Port Aluminum Heads and the Roller Valvetrain
This build uses the D-port head rather than a round port, which keeps exhaust manifold and header options wide open on a street car.
| Heads | Edelbrock 87cc aluminum D-port Pontiac heads with Fast-Burn CNC chambers, configured for a hydraulic roller. Butler also builds stock-port cast iron D-port heads if you want to keep the original look. |
| Lifters and rockers | Johnson high performance hydraulic roller lifters with Scorpion Endurance 1.65 roller rockers. |
| Pushrods | custom-length two-piece chromemoly pushrods with .020" oil restriction, which matters once you are feeding a roller valvetrain. |
| Lifter bores | a lifter bore reinforcement brace is on the list. On a high-spring-pressure roller engine in an older block it is cheap insurance. |
4. Sniper EFI and Hyperspark Ignition
The induction side is where this list stops resembling the carbureted build.
| Throttle body | a Holley Sniper EFI unit in the Quadrajet footprint with a self-tuning ECU and handheld monitor, so it bolts to a stock-pattern Pontiac intake and keeps a factory-appearing air cleaner. |
| Ignition | a complete Holley Hyperspark EFI-ready ignition kit built for Pontiac, so the ECU controls timing properly instead of fighting a mechanical advance curve. |
| Distributor gear | aftermarket distributors use a .500" shaft. The BOP composite gear replaces a worn bronze gear and will not shed metal into the oil. |
| Plug wires | 8.5mm wires cut to fit with a separator kit, routed away from the headers. |
5. Oiling, Sealing and Pontiac-Specific Fitment
Most of this list is the unglamorous half, and it is the reason builds off this page go together in one weekend.
| Oiling | a Butler PRO 80psi oil pump with a drive shaft and pickup screen, a three-quarter length windage tray with its spacer kit, and Driven break-in and run oils. |
| Rear main | the one-piece dual-lip Viton seal for 3.00" main blocks, with its relocated parting line and double lip. |
| Valley pan | the Tomahawk stock-appearing pan clears roller lifters and is for non-EGR intakes only. Always check pan to intake clearance; grinding the bottom of the intake runners or the top edge of the pan is normal, not a defect. |
| Dipstick and tubes | the correct upper and lower block tubes matter, and the lower tube changes if you run a windage tray or a 4-bolt main block. |
| Front of the engine | new 11-bolt timing cover with the stainless divider plate, sleeves and O-rings, high-flow aluminum water pump, thermostat and the timing cover to intake wedge spacer kit. |
6. Behind the Engine and In the Car
Two things get decided before the engine goes in, and both are easy to get wrong.
| Balance | Butler balances internally, so the engine takes a neutral balance flexplate or flywheel, not a factory offset-weighted one. SFI approved 166-tooth flexplates and billet steel flywheels are on the list for both bolt patterns. |
| Starter and pilot bearing | a mini starter clears headers that a factory unit will not, and a manual car needs the correct pilot bearing. |
| Fuel supply | EFI wants steady pressure and volume. Plan the pump, lines and return before the engine lands, not after. |
7. Dressing It and the Small Hardware
The last third of the list is fasteners, gaskets and trim, and it is what separates a build that goes together from one that stalls.
| Valve covers | stock chrome covers, or Butler's fabricated aluminum covers in two heights. With 1.65 roller rockers, clearance under the cover is worth checking before you buy. |
| Gaskets and seals | 5/16" thick high density valve cover gaskets, a standard intake gasket set with heat crossover block-off plates, and a fuel pump block-off plate if the mechanical pump comes off. |
| Crankcase ventilation | a 90 degree PCV valve with the correct valley pan grommet, and a breather on the other cover. |
| Bolt kits | a complete stainless accessory bolt kit, a cam bolt and thrust plate, crank bolt and washer, and flexplate or flywheel bolts. |
Buy the list, subtract what you have, and call Butler with your cam target, converter and gear. Compression and cam timing are what make 467 inches behave on pump gas with EFI.
Not sure what your Pontiac needs?
Email our tech team at tech@butlerperformance.com. Tell us your engine, heads, car, and power goal, and we will put the parts together as one combination that works.