Butler Pontiac Crank Pinning Kit

SKU: BPI-PCH-1027

Pontiac crankshaft pin drill fixture kits allow you to effortlessly drill and pin your Pontiac crankshaft and balancer to prevent slip when using a supercharger or when a second keys is needed for added strength. Made from high-grade steel, the bits easily drill into the crank and balancer.

Pricing: $99.95

Description

***Not for work with a BDS Blower Hubs***

Included in kit: Pontiac steel alignment hub Hub alignment bolt Drill bit (3) Dowel pins. This kit allows you to pin your crank without removing the crank or balancer from the car or having to carry it to a machine shop. This kit will allow you to drill a guided hole to install a 3/16 steel dowel pin in crank and balancer for added strength Simply bolt on the crank pin hub clocked 180 degrees from your factory keyway. Drill through the hole in the pinning hub with a depth of 2" from the face of the hub. Press pin through hub into crank and balancer. Remove hub bolt, hub and install your crank bolt and washer.