Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Pontiac V8 Engine Mount Bolts & Kits
Body by Body — Engine Mount Bolts & Kits for Pontiac V8s
Engine mount bolt kits are chassis parts, not engine parts. What fits a 1964-72 A-body...More Details »
Pontiac V8 Engine Plates & Adaptors
Chassis Hardware — Engine Plates & Adaptors for Pontiac V8s
Engine plates and adaptors hold a Pontiac V8 in place when a side mount will not do...More Details »
Pontiac V8 Evac Pump Kits & Accessories
Pull Vacuum, Seal the Rings — Evac Pump Kits & Accessories for Pontiac V8s
A crankcase evacuation system pulls vacuum on the crankcase...More Details »
Pontiac V8 Exhaust Header Gaskets
Hold the Heat — Exhaust Header Gaskets for Pontiac V8s
Exhaust header gaskets take the worst of it on a Pontiac V8 — full exhaust heat,...More Details »
No Image Available
Pontiac V8 Fans, Shrouds, and Accessories
Move the Air — Fans, Shrouds, and Accessories for Pontiac V8s
A radiator only cools the air you actually pull through it. Fans, shrouds and...More Details »
Pontiac V8 Fender Covers
Protect the Paint — Fender Covers for Pontiac V8s
Fender covers are the cheapest insurance in the shop. A dropped socket or a belt buckle against a painted...More Details »
Pontiac V8 Fender Covers
Cheap Insurance on Good Paint — Fender Covers for Pontiac V8s
A fender cover is cheap insurance on a car you have already spent money painting. It keeps...More Details »
Pontiac V8 FiTech EFI Systems
ECU On the Throttle Body — FiTech EFI Systems for Pontiac V8s
FiTech EFI Systems put the ECU on the throttle body itself. That means no hole in the...More Details »
Pontiac V8 Flexplate/Flywheel Bolts
Behind the Crank — Flexplate/Flywheel Bolts for Pontiac V8s
Flexplate and flywheel bolts tie the rotating assembly to the transmission side of...More Details »
Pontiac V8 Flexplates (Automatic)
Balance First — Flexplates (Automatic) for Pontiac V8s
A flexplate is the one part in an automatic Pontiac that has to agree with your crankshaft...More Details »
Pontiac V8 Flywheels (Manual)
Match the Balance, Then Pick the Material — Flywheels (Manual) for Pontiac V8s
A flywheel on a manual Pontiac does three jobs at once: it carries the...More Details »
Pontiac V8 Freeze Plugs & Block Acc.
Seal It Once — Freeze Plugs & Block Acc. for Pontiac V8s
Freeze plugs and block accessories are the parts nobody thinks about until one lets go....More Details »
Pontiac V8 Fuel Filters
Pre-Pump and Post-Pump — Fuel Filters for Pontiac V8s
Fuel filters are the cheapest insurance in the whole fuel system and the part most often installed in...More Details »
Pontiac V8 Fuel Pumps- In-Tank Carbureted
Quiet and Submerged — Fuel Pumps- In-Tank Carbureted for Pontiac V8s
An in-tank carbureted fuel pump puts the pump inside the tank,...More Details »
Pontiac V8 Fuel Pumps- In-Tank EFI
Inside the Tank — Fuel Pumps- In-Tank EFI for Pontiac V8s
An in-tank EFI fuel pump is the pump a fuel injected Pontiac V8 wants: submerged in fuel...More Details »
Pontiac V8 Fuel Regulators
Controlling the Pump — Fuel Regulators for Pontiac V8s
A fuel pressure regulator is what keeps the pump from overwhelming what it feeds. Too much pressure...More Details »
Pontiac V8 Fuel Tanks-Stock Replacement
Back to Original — Fuel Tanks-Stock Replacement for Pontiac V8s
A stock replacement fuel tank is the correct part for a Pontiac that is...More Details »
No Image Available
Pontiac V8 Full Size/Big Car
Big Car Hardware — Full Size/Big Car for Pontiac V8s
Full size Pontiacs are the Catalina, Bonneville, Grand Prix and 2+2, and their mounts do not follow...More Details »
Pontiac V8 Grommets
Measure the Hole First — Grommets for Pontiac V8s
A valve cover grommet is a two-dollar rubber part that decides whether a breather seals or leaks, and it is the...More Details »
Pontiac V8 Grommets and Rubber Caps
Small Rubber, Big Difference — Grommets and Rubber Caps for Pontiac V8s
Grommets and rubber caps are the small rubber parts that finish a Pontiac...More Details »
Pontiac V8 Guide Plates
Keep the Pushrod Square — Guide Plates for Pontiac V8s
Guide plates hold the pushrods in line so a stud-mounted rocker stays square to the valve. On a...More Details »
Pontiac V8 Harmonic Balancers/Dampers
Read It Right, Hold It Together — Harmonic Balancers/Dampers for Pontiac V8s
A harmonic balancer absorbs the torsional twist the crankshaft...More Details »
Pontiac V8 Hats
Something to Wear on the Way to the Show — Hats for Pontiac V8s
Butler hats are what most people leave here with the first time, and they are the easiest way to fly...More Details »
Pontiac V8 Head Bolt Kits
Read the Casting First — Head Bolt Kits for Pontiac V8s
Head bolt kits for a Pontiac V8 are chosen by cylinder head casting number and year, not by cubic...More Details »
Pontiac V8 Head Stud Kits
Clamp It and Keep It — Head Stud Kits for Pontiac V8s
Head stud kits thread into the block once and stay there, so the nut does the clamping and the block...More Details »
Pontiac V8 Head, Cam, and Valvetrain Tools
Geometry Sets the Result — Head, Cam, and Valvetrain Tools for Pontiac V8s
Head, cam and valvetrain tools cover the half of a Pontiac V8...More Details »
Pontiac V8 Header Bolts
Hot and Hard to Reach — Header Bolts for Pontiac V8s
Header bolts live in the worst place on the engine: red hot, hard to reach, and loosening every heat...More Details »
Pontiac V8 Hi Flow Sending Units
The Restriction Nobody Looks At — Hi Flow Sending Units for Pontiac V8s
A hi flow sending unit replaces the factory tank sender with one that flows...More Details »
Pontiac V8 Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits
Butler's Own Street Ladder — Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits for Pontiac V8s
The Hi-Torq hydraulic flat...More Details »
Pontiac V8 Hi-Torq Street Series Hydraulic Roller Cams
Roller Lift, Street Manners — Hi-Torq Street Series Hydraulic Roller Cams for Pontiac V8s
The Hi-Torq Street Series is...More Details »
Butler Performance Products
Description: Pontiac (1964-78) Oil Filter Housing (angled/120 deg.) w/Bypass and Steel Threads-NEW Reproduction *Does Not Include gasket*
**67-69 FB with Long Branch or RA Manifolds Must Use 90 Degree Oil...More Details »
Item #: AAU-N219RH
Condition:
New
Price: $89.95
Description: Overhaul Gasket Set w/Pontiac universal for 65' and later 326, 350, 389, 400, 421, 428, 455 Head Gaskets
Item #: SPM-KSX703-75
Condition:
New
Price: $139.95
Description: Piston Stop, Top Dead Center Stop, Cylinder Heads On, Spark Plug Style, 14mm, Adjustable Depth, Kit
Item #: PFM66792
Condition:
New
Price: $11.95
Description: These replace Press In Studs on 389 and 421 heads, Set of 16
Item #: SPE-RAS3-STUDS
Condition:
New
Price: $139.95
Description: Pro Series Pro Billet Distributor Kit with Pro Billet Distributor, 6AL Ignition Box, Ignition Coil, Wires, and more
Item #: TSP-KIT-PRO
Condition:
New
Price: $579.95
Description: Complete TSP Ignition Kit. Includes Pontiac Ready to Run Distributor with .491 shaft, 8.5mm Plug Wires, Blaster SS Coil. Your choice of Black or Red Plug Wires, and Coil. Includes Wire Separators
Item #: TSP-KIT-RTR
Condition:
New
Price: $376.95
Description: Pontiac SD Distributor Gasket
Item #: BPI-1031
Condition:
New
Price: $6.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Service Logo engraved right here in our shop
Item #: BPI-S6001-SERVICE-BK
Condition:
New
Price: $59.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Service Logo engraved right here in our shop
Item #: BPI-S6001-SERVICE-POL
Condition:
New
Price: $59.95
Description: Pontiac Small BP Patch Hat, Black/Charcoal, Adjustable
Item #: BPI-HAT-1511
Condition:
New
Price: $29.95
Description: Pontiac Dipstick Tube-1966-79 Upper Block Tube -Stainless Steel
Item #: BPI-1080
Condition:
New
Price: $26.95
Description: Pontiac D-Port Exhaust Gaskets with Relief Bends (Set)
Item #: APE-N179PPA
Condition:
New
Price: $25.95
Description: Pontiac Reconditioned 8-Bolt Timing Cover for 1964-1965 Applications
Item #: BPI-1018TC-8-64-65
Condition:
Refurbished
Limited Supply: Only 0 Left!
Estimated Time to Ship is 4-6 weeks
Price: $398.95
Description: Pontiac Reconditioned 8-Bolt Timing Cover for 1966-67 Applications
Item #: BPI-1018TC-8-66-67
Condition:
Refurbished
Limited Supply: Only 1 Left!
Estimated Time to Ship is 4-6 weeks
Price: $398.95
Description: Pontiac Reconditioned 8-Bolt Timing Cover for 1968 Applications
Item #: BPI-1018TC-8-68
Condition:
Refurbished
Limited Supply: Only 1 Left!
Estimated Time to Ship is 4-6 weeks
Price: $398.95
Description: Pontiac Reconditioned 11-Bolt Timing Cover for 1969-79 Applications. Dimpled for Tri-Power
Item #: BPI-1018TC-11D
Condition:
Refurbished
Limited Supply: Only 0 Left!
Estimated Time to Ship is 4-6 weeks
Price: $398.95
No Image Available
Description: This EGR valley pan is an original stock 2-piece design for 1973 and up.
Item #: BPI-1017VP-EGR
Condition:
New
Price: $295.00
Description: Pontiac Reconditioned Stock 90 Degree Oil Filter Housing retains factory oil pressure bypass
Item #: BPI-1019OF
Condition:
New
Limited Supply: Only 0 Left!
1-2 week lead time
Price: $199.95
Description: This valley pan is a reproduction of a stock 2-piece design for 1964-67. Also fits 61-’63 389 & 421 but not stock appearing. **Not for Use w/ EGR Intakes or 301** It’s steel design gives it...More Details »
Item #: APE-N178WD
Condition:
New
Price: $149.95
Description: Replacement Distributor gear for Stock .491 Shaft Pontiac Distributor
Item #: BPI-Dist-Gear-491
Condition:
New
Price: $44.97
Description: Pontiac Timing Cover to Intake Wedge Spacer (NO bolt)
Item #: BPI-WP1
Condition:
New
Price: $5.95
Description: Pontiac Timing Cover to Intake Wedge Spacer (Includes Stainless Steel bolt)
Item #: BPI-WP10
Condition:
New
Price: $7.95
Description: The all new Butler Trans Am shirt has arrived
Item #: BPI-TS-BP1615
Condition:
New
Price: $27.95
Description: All new Custom Pontiac Tri-Power EFI System
Item #: BPI-EFI-TRI-POWER
Condition:
New
Please Call for Availability
Kits starting at $6995.00
Description: Upper dipstick tube extension. This tube has the attaching bracket, used on 1966-68 Full-Size V8 cars with A/C
Item #: APE-N280
Condition:
New
Price: $42.95
Description: Upper dipstick tube extension. This tube has the attaching bracket, used on 1970-1979 V8 cars with A/C (except SD455 or 455 H.O. models).
Item #: AAU-N306DB
Condition:
New
Price: $24.95
Description: Pontiac Stainless Upper Dipstick Tube with Bracket for A/C. 1969 FB/TA & 69 GTO/Grand Prix- Fullsize, Each
Item #: AAU-N305DB
Condition:
New
Price: $35.95
Description: Pro Series Pro Billet Distributor is for the racer who needs added spark and precision for their high performance power plant.
Item #: TSP-JM7604R
Condition:
New
Free Ground Shipping
Price: $241.38
Description: Installation kit includes Pontiac valley pan gasket, grommet, PCV Valve, and bolt kit with two sealing washers
Does not fit the TPP-TP-041S
Item #: BPI-Bolt-Kit-VP-N178WD
Condition:
New
Price: $34.95
Description: No more torn or warped seals with the Butler CNC Milled Seal Install Tool
Item #: BPI-1002
Condition:
New
Price: $24.95