Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Pontiac V8 Engine Mount Bolts & Kits
Body by Body — Engine Mount Bolts & Kits for Pontiac V8s
Engine mount bolt kits are chassis parts, not engine parts. What fits a 1964-72 A-body...More Details »
Pontiac V8 Engine Plates & Adaptors
Chassis Hardware — Engine Plates & Adaptors for Pontiac V8s
Engine plates and adaptors hold a Pontiac V8 in place when a side mount will not do...More Details »
Pontiac V8 Evac Pump Kits & Accessories
Pull Vacuum, Seal the Rings — Evac Pump Kits & Accessories for Pontiac V8s
A crankcase evacuation system pulls vacuum on the crankcase...More Details »
Pontiac V8 Exhaust Header Gaskets
Hold the Heat — Exhaust Header Gaskets for Pontiac V8s
Exhaust header gaskets take the worst of it on a Pontiac V8 — full exhaust heat,...More Details »
No Image Available
Pontiac V8 Fans, Shrouds, and Accessories
Move the Air — Fans, Shrouds, and Accessories for Pontiac V8s
A radiator only cools the air you actually pull through it. Fans, shrouds and...More Details »
Pontiac V8 Fender Covers
Protect the Paint — Fender Covers for Pontiac V8s
Fender covers are the cheapest insurance in the shop. A dropped socket or a belt buckle against a painted...More Details »
Pontiac V8 Fender Covers
Cheap Insurance on Good Paint — Fender Covers for Pontiac V8s
A fender cover is cheap insurance on a car you have already spent money painting. It keeps...More Details »
Pontiac V8 FiTech EFI Systems
ECU On the Throttle Body — FiTech EFI Systems for Pontiac V8s
FiTech EFI Systems put the ECU on the throttle body itself. That means no hole in the...More Details »
Pontiac V8 Flexplate/Flywheel Bolts
Behind the Crank — Flexplate/Flywheel Bolts for Pontiac V8s
Flexplate and flywheel bolts tie the rotating assembly to the transmission side of...More Details »
Pontiac V8 Flexplates (Automatic)
Balance First — Flexplates (Automatic) for Pontiac V8s
A flexplate is the one part in an automatic Pontiac that has to agree with your crankshaft...More Details »
Pontiac V8 Flywheels (Manual)
Match the Balance, Then Pick the Material — Flywheels (Manual) for Pontiac V8s
A flywheel on a manual Pontiac does three jobs at once: it carries the...More Details »
Pontiac V8 Freeze Plugs & Block Acc.
Seal It Once — Freeze Plugs & Block Acc. for Pontiac V8s
Freeze plugs and block accessories are the parts nobody thinks about until one lets go....More Details »
Pontiac V8 Fuel Filters
Pre-Pump and Post-Pump — Fuel Filters for Pontiac V8s
Fuel filters are the cheapest insurance in the whole fuel system and the part most often installed in...More Details »
Pontiac V8 Fuel Pumps- In-Tank Carbureted
Quiet and Submerged — Fuel Pumps- In-Tank Carbureted for Pontiac V8s
An in-tank carbureted fuel pump puts the pump inside the tank,...More Details »
Pontiac V8 Fuel Pumps- In-Tank EFI
Inside the Tank — Fuel Pumps- In-Tank EFI for Pontiac V8s
An in-tank EFI fuel pump is the pump a fuel injected Pontiac V8 wants: submerged in fuel...More Details »
Pontiac V8 Fuel Regulators
Controlling the Pump — Fuel Regulators for Pontiac V8s
A fuel pressure regulator is what keeps the pump from overwhelming what it feeds. Too much pressure...More Details »
Pontiac V8 Fuel Tanks-Stock Replacement
Back to Original — Fuel Tanks-Stock Replacement for Pontiac V8s
A stock replacement fuel tank is the correct part for a Pontiac that is...More Details »
No Image Available
Pontiac V8 Full Size/Big Car
Big Car Hardware — Full Size/Big Car for Pontiac V8s
Full size Pontiacs are the Catalina, Bonneville, Grand Prix and 2+2, and their mounts do not follow...More Details »
Pontiac V8 Grommets
Measure the Hole First — Grommets for Pontiac V8s
A valve cover grommet is a two-dollar rubber part that decides whether a breather seals or leaks, and it is the...More Details »
Pontiac V8 Grommets and Rubber Caps
Small Rubber, Big Difference — Grommets and Rubber Caps for Pontiac V8s
Grommets and rubber caps are the small rubber parts that finish a Pontiac...More Details »
Pontiac V8 Guide Plates
Keep the Pushrod Square — Guide Plates for Pontiac V8s
Guide plates hold the pushrods in line so a stud-mounted rocker stays square to the valve. On a...More Details »
Pontiac V8 Harmonic Balancers/Dampers
Read It Right, Hold It Together — Harmonic Balancers/Dampers for Pontiac V8s
A harmonic balancer absorbs the torsional twist the crankshaft...More Details »
Pontiac V8 Hats
Something to Wear on the Way to the Show — Hats for Pontiac V8s
Butler hats are what most people leave here with the first time, and they are the easiest way to fly...More Details »
Pontiac V8 Head Bolt Kits
Read the Casting First — Head Bolt Kits for Pontiac V8s
Head bolt kits for a Pontiac V8 are chosen by cylinder head casting number and year, not by cubic...More Details »
Pontiac V8 Head Stud Kits
Clamp It and Keep It — Head Stud Kits for Pontiac V8s
Head stud kits thread into the block once and stay there, so the nut does the clamping and the block...More Details »
Pontiac V8 Head, Cam, and Valvetrain Tools
Geometry Sets the Result — Head, Cam, and Valvetrain Tools for Pontiac V8s
Head, cam and valvetrain tools cover the half of a Pontiac V8...More Details »
Pontiac V8 Header Bolts
Hot and Hard to Reach — Header Bolts for Pontiac V8s
Header bolts live in the worst place on the engine: red hot, hard to reach, and loosening every heat...More Details »
Pontiac V8 Hi Flow Sending Units
The Restriction Nobody Looks At — Hi Flow Sending Units for Pontiac V8s
A hi flow sending unit replaces the factory tank sender with one that flows...More Details »
Pontiac V8 Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits
Butler's Own Street Ladder — Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits for Pontiac V8s
The Hi-Torq hydraulic flat...More Details »
Pontiac V8 Hi-Torq Street Series Hydraulic Roller Cams
Roller Lift, Street Manners — Hi-Torq Street Series Hydraulic Roller Cams for Pontiac V8s
The Hi-Torq Street Series is...More Details »
Butler Performance Products
Compare to Edelbrock 2055 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-DP-72HR
Condition:
New
Price: $5,595.00
Free Shipping!
Compare to Edelbrock 2055 Power Package
Description: Estimated @ 460hp 538 lbs/ft*. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain, Performance...More Details »
Item #: BPI-TEP-DP-72FT
Condition:
New
Price: $4,949.00
Free Shipping!
Compare to Edelbrock 2054 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-DP-87HR
Condition:
New
Price: $5,595.00
Free Shipping!
Description: All New Butler Power Package for the 403 Olds. Bolt on Power
Item #: BPI-TEP-403
Condition:
New
Ships in 2-3 weeks
Price: $5,095.00
Sale: $4,995.00
Save: 2%
Save: $100.00
Compare to Edelbrock 2053 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-RD-72HR
Condition:
New
Price: $5,495.00
Free Shipping!
Compare to Edelbrock 2057 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-RD-87HR
Condition:
New
Price: $5,495.00
Free Shipping!
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 200/210 284/293
Lift .405/.405 @1.5 Ratio
LS 111
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-067-FT-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 200/210 244/254
Lift .405/.405 @1.5 Ratio
LS 111
Hyd. Flat Tappet
Item #: CCA-BP-RA-067-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR
Condition:
New
Price: $569.95
Description: INT/EXH @.050 212/225 256/268
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-068-FT-CL
Condition:
New
Price: $549.95
Description: INT/EXH @.050 212/225 256/268
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-068-FT
Condition:
New
Price: $299.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR-CL
Condition:
New
Price: $1,229.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR-K
Condition:
New
Price: $1,699.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-FT-744-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-744-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1969/1970 Ram Air IV factory 345/370hp
Lift...More Details »
Item #: CCA-BP-RA-041-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT
Condition:
New
Price: $299.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble. -6 Fittings and hose
Item #: BPI-1007FUEL-6
Condition:
New
Price: $149.95