Home - Return to Previous Page
Additional Images

Comp Cams Pontiac 1.65 Roller Tip Rocker Arms CCA-1452-16


Pontiac 1.65 Roller Tip Rocker Arms (incls. 3/8 & 7/16 lock nuts) (Set)

15 to 30 horsepower direct bolt on over stock rockers Precision ground Roller tip to reduce friction and Valve Guide/Valve Tip Wear High strength investment cast 8650 chromemoly body Pressed and Swedged axle for Long Life COMP Cams® Magnum Rockers™ are identifiable by the logo directly cast on the body itself, insist on the best and accept no imitations Long slot for high lift cams Super accurate ratio directly cast into the body
Pricing: $206.95

Free Shipping!


***Only recommended for Hyd. Flat Tappet Cams***

These Magnum Roller Rocker Arms for Pontiac V8 265-455 applications are the ultimate street rocker. With a 7/16" stud diameter and 1.65 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams® logo stamped into the underside of every Magnum Rocker.

Magnum Roller Rocker Arms™ (U.S. Patent No. 4,961,407)
COMP Cams® Magnum Roller Rockers™ are the ultimate street rocker. That’s because they were designed with the serious performance enthusiast in mind. They will help your engine make more power and last longer. Magnum Roller Rocker Arms™ are:

Magnum Roller Rocker Arms™ are made from 8620 chromemoly steel. This makes them stronger than die cast aluminum or stamped steel rockers. This superior material, along with the Magnum’s super stiff design, assures maximum lift because this rocker arm will not flex.

You can’t get maximum horsepower from your engine if your rocker ratio is off. We checked other rockers and found rockers that were as much as .040” short on lift. The Magnum Rockers™ are super Accurate. They check dead on every time.

The Magnum Roller Rockers™ can make between 15 and 30 horsepower over other rockers! Why? The secret is that not only does the roller tip reduce friction, the Magnum Rockers™ incredibly stiff design and super accurate ratios yield more effective valve lift.

The roller tip design reduces friction by not scrubbing the valve end or pushing the valve stem hard against the valve guide. This in conjunction with super strong design of the rocker makes for a simple, bulletproof, and cost effective combination.

Magnum Roller Rockers™ can be used with all High Energy™, Magnum, Xtreme Energy™, Nitrous HP™, Xtreme 4X4™ and Xtreme Marine™ Camshafts as well as any other hydraulic or solid cam WHERE OPEN SPRING PRESSURES DO NOT EXCEED 350 lbs.


  • CCA-1452-16
  • CCA-1452-16
  • Comp Cams
  • New


Shipping Information

  • Item Requires Shipping
  • 6.0 lbs.
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.