Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis/70 LeMans, Set BPI-MM5

Engine Mount Adaptor Kit Part# MM5
Hardware Includes:

• 2- Adaptor Plates  
• 6- 7/16”-14 x ¾” Grade 5 Bolts
• 2- 7/16”-14 x ¾” Button Head Socket Cap Screws
• 6- 7/16” Lock Washers (Blue Loctite Required)

Note: It has been brought to our attention that some late 70’s Pontiac blocks have a boss that interferes with the adaptor plate. If this is the case, the boss will have to be ground for clearance or drilled or tapped to 7/16” to bolt the mount directly to the block. If drilled or tapped, this side will not require an adaptor plate. Adaptor plates must fit flat.