Pontiac Stock Reconditioned EGR Valley Pan, 1973 and later

Stock Reconditioned EGR Valley Pan for 1973 & Later Pontiac V8 — refurbished in our shop and ready to install (Can be Painted)

**Image is for display only. Reconditioned pans are refurbished originals and may vary slightly from the photo shown**

This is the EGR-style valley pan, with the exhaust crossover passage, used on 1973 and later Pontiac V8 engines. Each pan is a genuine Pontiac core that our shop cleans, straightens for a proper seal, inspects for cracks and damage, and refinishes.

Fits 1973 & later Pontiac V8 engines originally equipped with EGR (350, 400, 455)

Clearancing may have to be done for use with Hyd Roller Lifters

**Reconditioned original Pontiac pan, not a reproduction — minor cosmetic variation from pan to pan is normal**

**Does not include valley pan gasket. See Part# SPM-11960C recommended gasket**

**Does not include mounting hardware. See Bolt Kit Part# BPI-Bolt-Kit-VP-68-79 (1968-79)**

***Valley pan/intake clearance on a Pontiac must always be checked with stock or aftermarket valley pans and intakes. You may have to grind the bottom of the intake runners if it sits against or on the valley pan and/or grind the top edges of the valley pan***

Additional Accessories

Gasket (recommended, black fiber)- SPM-11960C

Gasket (paper)- SPM-11960A

Gasket (rubberized cork)- SPM-11960B

Bolt Kit- 2 bolts w/neoprene washers, OEM style 1968-79- BPI-Bolt-Kit-VP-68-79

Other Valley Pan Options

1967 & Earlier reconditioned pan (389, PCV in rear)- BPI-1017VP-389

Raw, unreconditioned EGR core- BPI-1017VP-EGR-RAW