Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: Sleeve for any Distributor To Fit In '73-74 SD or RAV Blocks With Larger Distributor Hole
Item #: BPI-1015
Condition:
New
Price: $99.95
Description: Allows you to convert to serpentine crank pulley and relocate your alternator to a low mount position. For use with electric water pump only.
Item #: BPI-ALT1-SERP-KIT-1
Condition:
New
Price: $289.95
Description: Allows you to convert to serpentine crank pulley and relocate your alternator to a low mount position. For use with mechanical water pump only.
Item #: BPI-ALT1-SERP-KIT-2
Condition:
New
Price: $409.95
Description: Butler Performance classic service hoodie now available in Heather Red
Item #: BPI-Hoodie-Service-Red
Condition:
New
Price: $39.95
Description: Features Butler Service Logo Leather Patch on the front
Item #: BPI-HAT-1506
Condition:
New
Price: $29.95
Description: Butler Performance Two Tone Work Shirt, Service Logo, Grey/Navy, X- Large
Item #: BPI-WS-RKSY20-SERVICE
Condition:
New
Price: $49.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Cast Iron Heads
Item #: BPI-SK-HR-98438
Condition:
New
Price: $389.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Cast Iron Heads
Item #: BPI-SK-HR-995
Condition:
New
Price: $359.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Edelbrock Aluminum Heads
Item #: BPI-SK-FT-986
Condition:
New
Please Call for Availability
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Cast Iron Heads
Item #: BPI-SK-FT-68404
Condition:
New
Price: $359.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Edelbrock Aluminum Heads
Item #: BPI-SK-HR-5845
Condition:
New
Price: $429.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Cast Iron Heads
Item #: BPI-SK-HR-73949
Condition:
New
Price: $359.95
Description: Butler Pontiac Stud Girdles For Edelbrock Heads includes 7/16" Polylocks (Set)
Item #: BPI-1153BP
Condition:
New
Price: $229.00
Description: Thread cleaning chaser sets are designed to clean dirty holes.
Item #: BPI-900-200
Condition:
New
Price: $19.95
Description: Timing Chain Gear Retaining Washer/Spacer When a Stock Fuel Pump Ecc. is Not Used
Item #: BPI-CW-101
Condition:
New
Price: $16.95
Description: Titanium Retainer 1.437" (Set)
1.400 To 1.500 Springs
Item #: BPI-RETAINER-1.437T-16
Condition:
New
Price: $199.95
Description: Tri-Power 2 bbl. Carb Mount Gasket, Center, 59-65 (takes 1 plus 2 outers)
Item #: BPI-Tripower-Carb-Gasket-59-65-Center
Condition:
New
Price: $3.95
Description: Tri-Power 2 bbl. Carb Mount Gasket, Outer, 59-65 (takes 2 plus center), 66 (takes 3)
Item #: BPI-Tripower-Carb-Gasket-59-65-Outer
Condition:
New
Price: $3.95
Description: BFA Valley Pan Replacement Stud Kit with Grommet
Includes 2 studs, neopreme washers, lock nuts, and grommet
Item #: BPI-Bolt-Kit-BFA-VP
Condition:
New
Price: $7.95
Description: Butler Performance Vintage Pontiac Service Retro T-Shirt
Item #: BPI-TS-BP1607R
Condition:
New
Price: $27.95
Description: Warrior Intake Turtle
Item #: BRO-DT-106
Condition:
New
Price: $79.95
Description: Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-72HR-370
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $9,499.00
Sale: $8,995.00
Save: 5%
Save: $504.00
Butler Wide Port Head Package, CNC Machined Pontiac 72cc 370+CFM Cylinder Heads, Solid Roller (Pair)
Description: Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-72SR-370
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $9,699.00
Sale: $9,195.00
Save: 5%
Save: $504.00
Description: Pontiac 1967-79 400-455 87cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-87HR-370
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $9,499.00
Sale: $8,995.00
Save: 5%
Save: $504.00
Butler Wide Port Head Package, CNC Machined Pontiac 87cc 370+CFM Cylinder Heads, Solid Roller (Pair)
Description: Pontiac 1967-79 400-455 87cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-87SR-370
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $9,699.00
Sale: $9,195.00
Save: 5%
Save: $504.00
Description: Benefits:
• Quicker opening lobe profiles deliver increased responsiveness & more area under the lift curve
• More vacuum allows a step up in duration for greater performance
• Best...More Details »
Item #: BPI-K-51-423-11
Condition:
New
Price: $1,549.95
Free Shipping!
Description: Lift .447"/.455"
Duration 256°/268°
RPM Range 1000-5200
Includes Cam and Lifter Master Kit
Item #: BPI-K51-221-4
Condition:
New
Price: $859.95
Free Shipping!
Description: Lift .462"/.470"
Duration 262°/270°
RPM Range 1300-5500
Includes Cam and Lifter Master Kit
Item #: BPI-K51-222-4
Condition:
New
Price: $879.95
Free Shipping!
Description: Lift .477"/.480"
Duration 268°/380°
RPM Range 1600-5800
Includes Cam and Lifter Master Kit
Item #: BPI-K51-223-4
Condition:
New
Price: $879.95
Free Shipping!