Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Choose from Factor looking Muscle Car lids to full out CNC Machined Logo custom lids
choose from Factor looking Muscle Car lids to full out CNC Machined Logo custom lids
Top off your Pontiac engine with air cleaners and filters from Butler Performance.
The first component in any performance-focused engine build is the air intake. To ensure the engine breathes efficiently and cleanly, Butler Performance offers a dedicated selection of Air...More Details »
Drop base units made specifically for shaker hoods. Will provide the drop needed for correct shaker height alignment. (also can be used as a stand alone air cleaner on non shaker cars)
Drop base units made specifically for shaker hoods. Will provide the drop needed for correct shaker height alignment. (also can be used as a stand alone air cleaner on non shaker cars)
Need to relocate alternator when using an electric water pump? Butler Performance has just what you need.
For the serious enthusiast, restorer, or builder, knowledge is the foundation of any successful project. Butler Performance , while renowned for its high-performance engines and components, also...More Details »
Not only are breathers and oil caps necessary for a good performing engine but they can add to the look as well. Shop breathers and oil caps here at Butler.
or the experienced engine builder, machine shop, or meticulous DIY enthusiast, the need for a truly custom cylinder head setup is paramount. While Butler Performance offers fully assembled,...More Details »
No Image Available
Butler Performance has built many performance engines over the last three decades. Each of these engines has the benefit of high-quality part combinations that have been engineered and tested in...More Details »
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
For the dedicated Pontiac V8 enthusiast pursuing maximum horsepower, the cylinder heads are the throttle plate of the engine. While high-quality aftermarket aluminum heads offer a significant...More Details »
Common Usage: Mild street performance to mild race
Key Benefits: Modern, aggressive roller profiles, reduced friction, low maintenance, reduced valve train noise, more power than...More Details »
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
Butler Performance Products
Description: Features Butler Retro Logo Leather Patch on the front
Item #: BPI-HAT-1508
Condition:
New
Price: $29.95
Description: Steel Construction
Includes Coated Grinding Stone
Mounting Bracket
Handle
Item #: BPI-PFM66785
Condition:
New
Price: $46.95
Description: BP Built Pontiac 72cc ROUND PORT BP/Edelbrock Heads - Complete Set **Hyd Flat Tappet** w/ CNC Machined Chambers
Includes 2 Complete Heads
Item #: BPI-72cc-EDL-RdPort-FT-NP
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $3,195.00
Description: BP Built Pontiac 72cc ROUND PORT BP/Edelbrock Heads - Complete Set **Hyd Roller (Double Spring)** w/ CNC Machined Chambers
Includes 2 Complete Heads
Item #: BPI-72cc-EDL-RdPort-HR-NP
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $3,195.00
Description: BP Built Pontiac 87cc ROUND PORT BP/Edelbrock Heads - Complete Set **Hyd Roller (Double Spring)** w/ CNC Machined Chambers
Includes 2 Complete Heads
Item #: BPI-87cc-EDL-RdPort-HR-NP
Condition:
New
Current estimated ship time is 3-4 weeks or less
Price: $3,395.00
Description: Sleeve for any Distributor To Fit In '73-74 SD or RAV Blocks With Larger Distributor Hole
Item #: BPI-1015
Condition:
New
Price: $99.95
Description: Allows you to convert to serpentine crank pulley and relocate your alternator to a low mount position. For use with electric water pump only.
Item #: BPI-ALT1-SERP-KIT-1
Condition:
New
Price: $289.95
Description: Allows you to convert to serpentine crank pulley and relocate your alternator to a low mount position. For use with mechanical water pump only.
Item #: BPI-ALT1-SERP-KIT-2
Condition:
New
Price: $409.95
Description: Butler Performance classic service hoodie now available in Heather Red
Item #: BPI-Hoodie-Service-Red
Condition:
New
Price: $39.95
Description: Features Butler Service Logo Leather Patch on the front
Item #: BPI-HAT-1506
Condition:
New
Price: $29.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool (for Viton Seals). For Cast Iron Heads
Item #: BPI-SK-HR-98438
Condition:
New
Price: $369.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool (w/Viton Seals option). For Cast Iron Heads
Item #: BPI-SK-HR-995
Condition:
New
Price: $359.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Edelbrock Aluminum Heads
Item #: BPI-SK-FT-986
Condition:
New
Price: $389.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool (w/Viton Seals option). For Cast Iron Heads
Item #: BPI-SK-FT-68404
Condition:
New
Price: $359.95
Description: Butler Spring kit with valve springs, retainers, locks, seals, shims and install tool. For Edelbrock Aluminum Heads
Item #: BPI-SK-HR-5845
Condition:
New
Price: $429.95
Description: Butler Pontiac Stud Girdles For Edelbrock Heads includes 7/16" Polylocks (Set)
Item #: BPI-1153BP
Condition:
New
Price: $239.00
Description: Thread cleaning chaser sets are designed to clean dirty holes.
Item #: BPI-900-200
Condition:
New
Price: $19.95
Description: Timing Chain Gear Retaining Washer/Spacer When a Stock Fuel Pump Ecc. is Not Used
Item #: BPI-CW-101
Condition:
New
Price: $16.95
Description: Titanium Retainer 1.437" (Set)
1.400 To 1.500 Springs
6AL-4V Titanium Material
Item #: BPI-RETAINER-1.437T-16
Condition:
New
Price: $199.95
Description: Tri-Power 2 bbl. Carb Mount Gasket, Center, 59-65 (takes 1 plus 2 outers)
Item #: BPI-Tripower-Carb-Gasket-59-65-Center
Condition:
New
Price: $3.95
Description: Tri-Power 2 bbl. Carb Mount Gasket, Outer, 59-65 (takes 2 plus center), 66 (takes 3)
Item #: BPI-Tripower-Carb-Gasket-59-65-Outer
Condition:
New
Price: $3.95
Description: All the block plugs you need for the Pontiac Engine
Item #: BPI-Block-Plug-Kit-Factory
Condition:
New
Price: $74.95
Description: BFA Valley Pan Replacement Stud Kit with Grommet.***This will only work with the Thin aluminum Valley Pans with. They will not work on a Stock Replacement Tomahawk Valley Pan that we sell....More Details »
Item #: BPI-Bolt-Kit-BFA-VP
Condition:
New
Price: $7.95
Description: Valve Locks 10 DEG 11/32
Item #: BPI-611-16
Condition:
New
Price: $38.95
Description: Butler Performance Vintage Pontiac Service Retro T-Shirt
Item #: BPI-TS-BP1607R
Condition:
New
Price: $27.95
Description: Warrior Intake Turtle
Item #: BRO-DT-106
Condition:
New
Please Call for Availability
***SEE PART# BPI-10633***
Description: Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-72HR-370
Condition:
New
Current estimated ship time is 6-9 weeks or less
Price: $9,499.00
Butler Wide Port Head Package, CNC Machined Pontiac 72cc 370+CFM Cylinder Heads, Solid Roller (Pair)
Description: Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-72SR-370
Condition:
New
Current estimated ship time is 6-9 weeks or less
Price: $9,699.00
Description: Pontiac 1967-79 400-455 87cc Edelbrock Round Port Heads, Ported to 370+CFM, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Application), Retainers, Chromoly Locks,...More Details »
Item #: BPI-TEP-WP-87HR-370
Condition:
New
Current estimated ship time is 6-9 weeks or less
Price: $9,499.00