Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: Factory Replacement Fuel Tank with In-Tank Fuel System Included. Converts EFi ready tank to use in carbureted applications
Item #: BPI-EFI-CARB-SOLUTION
Condition:
New
Price: $929.95
Free Shipping!
Description:
Butler Performance Engine Builder Kit
Includes Butler Balanced Rotating Assembly
4.250" Stroke Cast or Forged Crank/H-Beam Rods
Custom machined and...More Details »
Item #: BP-ENGINE-KIT-460-474
Condition:
New
Due to Popular Demand current lead time runs about 6-8 weeks
Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $14,995.00
Description:
Butler Performance Stealth/Stock Appearing Engine- Carb or EFI
4.00" Stroke 400 or 428 block
Forged Crank/H-Beam Rods
Ready to assemble
All...More Details »
Item #: BP-ENGINE-KIT-432-439
Condition:
New
Due to Popular Demand current lead time runs about 8-10 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $14,495.00
Description:
Butler Performance Crate Engine in Builder Kit form- EFI or carb, Ready to assemble
Includes Butler Balanced Rotating Assembly
4.500" Stroke Forged Crank/H-Beam...More Details »
Item #: BP-ENGINE-KIT-487-501
Condition:
New
Due to Popular Demand current lead time runs about 6-8 weeks
Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $15,495.00
Description:
Butler Performance Stealth/Stock Appearing Engine
3.75" or 4.250" Stroke 389 block
Depending on core availability- 4.092, 4.122 Bore
Cast or Forged...More Details »
Item #: BP-ENGINE-KIT-395-447
Condition:
New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $13,995.00
Description:
Butler Performance Stealth/Stock Appearing Engine 390-425hp
3.75" Stroke 400 block
Depending on core availability- 4.150, 4.155, 4.160, 4.181 Bore...More Details »
Item #: BP-ENGINE-KIT-406-412
Condition:
New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $12,495.00
Description: Crosswind Port Match Service by Butler Performance
Item #: 3102INT-CRO
Condition:
New
Price: $195.00
Description: Definitive Firebird & Trans AM Guide 1970 1/2-1981 by Rocky Rotella
Item #: BPI-CT591
Condition:
New
Description: Dial Calipers, 0.001 to 6.000 in Range, Case, Stainless, Each
Item #: ASP-ALL96410
Condition:
New
Price: $38.95
Description: ASP-ALL96411
Item #: ASP-ALL96411
Condition:
New
Price: $32.95
96414
Description: Dial Indicator Kit, 1 in Travel, 0.001 Increments, Magnetic Base, Kit
Item #: ASP-ALL96414
Condition:
New
Price: $43.95
Description: Pontiac Blue Paint-Metallic (66-70)
Item #: DUP-DE1616
Condition:
New
Paint can only be shipped via ground services. Not available to ship Air or any USPS service due to flammable contents.
Price: $13.95
Description: Pontiac Sky Blue Paint 59-65
Item #: DUP-DE1610
Condition:
New
Paint can only be shipped via ground services. Not
available to ship Air or any USPS service due to
flammable contents.
Price: $13.95
Description: Edelbrock Performer 2156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2156
Condition:
New
Price: $195.00
Description: Edelbrock Performer RPM 7156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-7156
Condition:
New
Price: $195.00
Description: Edelbrock Torker II 5056 Port Match Service by Butler Performance
Item #: 3102INT-EDL-5056
Condition:
New
Price: $195.00
Description: Edelbrock Victor 2957 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2957
Condition:
New
Price: $195.00
Description: 1962-1963 Super Duty Guide Plates (Fits #980 & #127 SD Heads) (Set/8)
Item #: FMW-EN60100A
Condition:
New
Price: $189.95
Description: THIS SET INCLUDES ONE OF EACH SIZE, .002,.003,.004,.005,.006,.008,.011,.012,.013,.014, .016,.018,.020,.022 AND .025.
Item #: ASP-ALL96420
Condition:
New
Price: $7.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-POL
Condition:
New
Price: $49.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-POL
Condition:
New
Price: $49.95
Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your Carbureted fuel system
Item #: TAN-CARB-LINE-KIT45
Condition:
New
Price: $309.95
Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your EFI fuel system
Item #: TAN-EFI-LINE-KIT45
Condition:
New
Price: $349.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-POL
Condition:
New
Price: $69.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-POL
Condition:
New
Price: $49.95
Description: 6061 T6 machined aluminum
Our Highest Flowing Vacuum Relief Valve with a 1/2 NPT pipe thread. This unit is adjustable from 5 to 20 in.hg. and is easy to adjust.
Item #: GZM-VCV101A
Condition:
New
Price: $109.95