Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Choose from Factor looking Muscle Car lids to full out CNC Machined Logo custom lids
choose from Factor looking Muscle Car lids to full out CNC Machined Logo custom lids
Top off your Pontiac engine with an air cleaner or new filter from Butler Performance.
The first component in any performance-focused engine build is the air intake. To ensure the engine breathes efficiently and cleanly, Butler Performance offers a dedicated selection of Air...More Details »
Drop base units made specifically for shaker hoods. Will provide the drop needed for correct shaker height alignment. (also can be used as a stand alone air cleaner on non shaker cars)
Drop base units made specifically for shaker hoods. Will provide the drop needed for correct shaker height alignment. (also can be used as a stand alone air cleaner on non shaker cars)
Need to relocate alternator when using an electric water pump? Butler Performance has just what you need.
For the serious enthusiast, restorer, or builder, knowledge is the foundation of any successful project. Butler Performance , while renowned for its high-performance engines and components, also...More Details »
Not only are breathers and oil caps necessary for a good performing engine but they can add to the look as well. Shop breathers and oil caps here at Butler.
or the experienced engine builder, machine shop, or meticulous DIY enthusiast, the need for a truly custom cylinder head setup is paramount. While Butler Performance offers fully assembled,...More Details »
No Image Available
Butler Performance has built many performance engines over the last three decades. Each of these engines has the benefit of high-quality part combinations that have been engineered and tested in...More Details »
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
For the dedicated Pontiac V8 enthusiast pursuing maximum horsepower, the cylinder heads are the throttle plate of the engine. While high-quality aftermarket aluminum heads offer a significant...More Details »
Common Usage: Mild street performance to mild race
Key Benefits: Modern, aggressive roller profiles, reduced friction, low maintenance, reduced valve train noise, more power than...More Details »
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
Butler Performance Products
Description:
Butler Performance Engine Builder Kit
Includes Butler Balanced Rotating Assembly
4.250" Stroke Cast or Forged Crank/H-Beam Rods
Custom machined and...More Details »
Item #: BP-ENGINE-KIT-460-474
Condition:
New
Due to Popular Demand current lead time runs about 12-15 weeks
Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $16,995.00
Description:
Butler Performance Stealth/Stock Appearing Engine- Carb or EFI
4.00" Stroke 400 or 428 block
Forged Crank/H-Beam Rods
Ready to assemble
All...More Details »
Item #: BP-ENGINE-KIT-432-439
Condition:
New
Due to Popular Demand current lead time runs about 12-15 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for
residential and liftgate.
Price: $15,995.00
Description:
Butler Performance Crate Engine in Builder Kit form- EFI or carb, Ready to assemble
Includes Butler Balanced Rotating Assembly
4.500" Stroke Forged Crank/H-Beam...More Details »
Item #: BP-ENGINE-KIT-487-501
Condition:
New
Due to Popular Demand current lead time runs about 12-15 weeks
Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $16,995.00
Description:
Butler Performance Stealth/Stock Appearing Engine
3.75" or 4.250" Stroke 389 block
Depending on core availability- 4.092, 4.122 Bore
Cast or Forged...More Details »
Item #: BP-ENGINE-KIT-395-447
Condition:
New
Due to Popular Demand current lead time runs about 12-15 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for
residential and liftgate.
Price: $14,995.00
Description:
Butler Performance Stealth/Stock Appearing Engine 390-425hp
3.75" Stroke 400 block
Depending on core availability- 4.150, 4.155, 4.160, 4.181 Bore...More Details »
Item #: BP-ENGINE-KIT-406-412
Condition:
New
Due to Popular Demand current lead time runs about 12-15 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $13,995.00
Description: Crosswind Port Match Service by Butler Performance
Item #: 3102INT-CRO
Condition:
New
Price: $295.00
Description: The BEST way to get your cylinder heads to us! Save time, money, and hassle by selecting this option for shipping your cylinder heads to Butler Performance.
Item #: BPI-SHIPHEADS
Condition:
New
Price: $249.95
Free Shipping!
Description: Definitive Firebird & Trans AM Guide 1970 1/2-1981 by Rocky Rotella
Item #: BPI-CT591
Condition:
New
Description: Dial Calipers, 0.001 to 6.000 in Range, Case, Stainless, Each
Item #: ASP-ALL96410
Condition:
New
Price: $38.95
Description: ASP-ALL96411
Item #: ASP-ALL96411
Condition:
New
Price: $32.95
96414
Description: Dial Indicator Kit, 1 in Travel, 0.001 Increments, Magnetic Base, Kit
Item #: ASP-ALL96414
Condition:
New
Price: $43.95
Description: Pontiac Blue Paint-Metallic (66-70)
Item #: DUP-DE1616
Condition:
New
Paint can only be shipped via ground services. Not available to ship Air or any USPS service due to flammable contents.
Price: $13.95
Description: Pontiac Sky Blue Paint 59-65
Item #: DUP-DE1610
Condition:
New
Paint can only be shipped via ground services. Not
available to ship Air or any USPS service due to
flammable contents.
Price: $13.95
Description: Edelbrock Performer 2156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2156
Condition:
New
Price: $295.00
Description: Edelbrock Performer RPM 7156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-7156
Condition:
New
Price: $295.00
Description: Edelbrock Torker II 5056 Port Match Service by Butler Performance
Item #: 3102INT-EDL-5056
Condition:
New
Price: $295.00
Description: Edelbrock Victor 2957 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2957
Condition:
New
Price: $295.00
Description: We have packaged this regulator along with the ORB to -6AN adapter fittings needed to run -6AN fuel line. Also included in this kit is the plug so the regulator can be plumbed before or after the engine.
Item #: TAN-BYP7910-KIT
Condition:
New
Price: $149.95
Description: 1962-1963 Super Duty Guide Plates (Fits #980 & #127 SD Heads) (Set/8)
Item #: FMW-EN60100A
Condition:
New
Price: $189.95
Description: Mike Montanari's Custom designed and tested oil pan protection plate.
Item #: MM-ABODY-PLATE
Condition:
New
Please Call for Availability
Description: THIS SET INCLUDES ONE OF EACH SIZE, .002,.003,.004,.005,.006,.008,.011,.012,.013,.014, .016,.018,.020,.022 AND .025.
Item #: ASP-ALL96420
Condition:
New
Price: $7.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-POL
Condition:
New
Price: $49.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-POL
Condition:
New
Price: $49.95
Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your Carbureted fuel system
Item #: TAN-CARB-LINE-KIT45
Condition:
New
Price: $309.95
Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your EFI fuel system
Item #: TAN-EFI-LINE-KIT45
Condition:
New
Price: $349.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-POL
Condition:
New
Price: $69.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-BK
Condition:
New
Price: $49.95