Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: Pontiac Retro-Fit Hydraulic Roller Lifters (Set/16)
Item #: BPI-5884
Condition:
New
Please Call for Availability
See 5884R for same lifter with revised oil band location
Description: Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*
Item #: OFF-5499
Condition:
New
Please Call for Availability
Free Shipping!
Description: Pilot Bushing Driver, Steel, Black Oxide, 0.590 in ID Pilot Bushings, Each
Item #: ASP-ALL26115
Condition:
New
Price: $24.95
Description: Kit contains 12 in. long strings—two green .001 in. to .003 in., and one red .002 in. to .006 in.—individually packaged inside calibrated sleeves and detailed instructions
Item #: ASP-ALL96475
Condition:
New
Price: $8.99
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114C
Condition:
New
Price: $149.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114BLK
Condition:
New
Price: $149.95
Description: 1100+ Hp Capable
Titanium valves
Titanium retainers
PSI or PAC springs
FOR USE ON AFTERMARKET BLOCKS ONLY, recommended 4.310 or larger bores (4.280 minimum)
Requires offset solid roller lifters and shaft rockers
Item #: EDL-77849BP-440
Condition:
New
Price: $10,995.00
Description: NEW EARLY 69 WATER PUMP SHORT HUB 4", ALL PONT V8 (APE)
Gasket not included
Item #: APE-N140NW
Condition:
New
Not Available
***SEE PART# BRW-1647***
Price: $118.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16C
Condition:
New
Price: $169.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16BLK
Condition:
New
Price: $169.95
Description: Pontiac 1964-1968 8 Bolt Water Pump- Cast Iron with gasket
Item #: BPI-WP-8B
Condition:
New
***SEE PART # BRW-1622***
Description: Pontiac 1965 389 Chrome Valve Covers (Set)
*hole for 5/8 rubber grommet on pass. side, twist-in cap/ breather in drivers side*
Item #: AAU-N221R
Condition:
New
Price: $137.95
Description: Pontiac 1966 Chrome Valve Covers-set
Pass. side- no hole/ Dr. side- hole for twist-in breather
Item #: AAU-N221T
Condition:
New
Price: $161.95
Description: Dipstick Tube for Windage Tray
Item #: AAU-N300
Condition:
New
Price: $21.95
Description: Lower Dipstick Tube w/Bracket (When Not Using a Windage Tray)
Item #: AAU-N302
Condition:
New
Price: $26.95
Description: Guide plates, Flat, Steel, 3/8 in., Machined for 3/8 in our shop. Pontiac, 389, 400, 421, 428, 455, for EDL Performer Pontiac Head, Set of 8
Item #: BPI-GP-38-8
Condition:
New
Price: $99.95
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1028
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1029
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 389-421 1959-65 Dipstick Block Tube- 1 of 3 Pieces For Use w/ N250, N298
Item #: APE-N252
Condition:
New
Price: $22.95
Description: Pontiac 389-421 1964-65 Upper Dipstick Tube- 1 of 3 Pieces For Use w/ N252, N298
Item #: APE-N250
Condition:
New
Price: $48.95
Description: Pontiac 389-421 1965-66 Lower Dipstick Tube For Use With Tray- 1 of 3 Pieces For Use w/ N250,N252
Item #: AAU-N298
Condition:
New
Price: $21.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-POL
Condition:
New
Price: $69.95
Description: PN257A
Gaskets included
Item #: APE-PN257A
Condition:
New
Not Available
Price: $89.95
Description: Pontiac 5/16 X 3/4 Ex Long Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025076
Condition:
New
Price: $1.95
Description: Pontiac 5/16 X 5/8 Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025068
Condition:
New
Price: $2.49
Description: Pontiac 5/16 X 5/8 Dowel Pins-For Block / Head Deck Set/4
Item #: BPI-Bolt-Head-Dowel-Pin-Set
Condition:
New
Price: $6.95
Description: 5/16" x 1" EX Long Dowel Pins- for 4-Bolt Main Caps-Center 3 Set/6
Item #: BPI-Bolt-Main-Dowel-Pin-XL-Set
Condition:
New
Price: $9.95
Description: 5/16" x 1" Ex Long Dowel Pins- for 4-Bolt Main Caps-Center 3 Single
Item #: MSC-06025100
Condition:
New
Price: $2.49
Description: 5/16" x 3/4" Dowel Pins- for 4-Bolt Main Caps-Center 3 Single
Item #: MSC-06025084
Condition:
New
Price: $2.49