Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: 7/16 Rocker Arm Stud and Lock Nut Upgrade Kit for 1967 and later heads (Set/16)
Item #: BPI-Upgrade-Rocker-Studs-350-455
Condition:
New
Price: $49.95
Description: Pontiac A/C Dipstick 1968-79 RAW FINISH
*28 3/4" long from top of bell to tip*
Item #: BPI-9405R-4
Condition:
New
Price: $18.95
Description: 6061 Billet Aluminum. Multi Axis CNC Milled in our shop. Custom designed for the offset and elevation of stock and aftermarket blocks. Grooved posts grip distributor and bolt hole slotted for...More Details »
Item #: BPI-DC1
Condition:
New
Price: $29.95
Description: Bolt On Remote Oil Filter Bypass Kit
Item #: BPI-1011-Kit
Condition:
New
Price: $329.95
Description: Bolt On Remote Oil Filter Bypass Plate 1/2" pipe
Item #: BPI-1011
Condition:
New
Price: $37.95
Description: Works well when you need to space up your covers for rocker clearance or to run stud girdles.
Item #: BPI-1039
Condition:
New
Price: $119.95
Description: Pontiac Book- How To Restore Your 1964-1974 Pontiac GTO by Don
Keefe
Item #: BPI-SA218P
Condition:
New
Price: $28.95
Description: Pontiac Book-"How to Build Max-Performance Pontiac V-8s" *UPDATED* by Rocky Rotella
(This is an Updated step-by-step book loaded with how-to, tech tips and combinations for building your very own High Horse Power engine)
Item #: BPI-SA233
Condition:
New
Price: $26.95
Description: Pontiac Book-"How to Re-Build Pontiac V-8s" *UPDATED* by Rocky Rotella
(This is a step-by-step book with over 400 color photos and a bunch of helpful tip sections throughout the book. This will...More Details »
Item #: BPI-SA200
Condition:
New
Price: $22.95
Description: Bronze Valve Guides 11/32 (.343") ID - .504 OD - 2 3/8" Long/Pont. Cast Iron Heads
Item #: PEP-B5006+2-16
Condition:
New
Price: $54.95
Description: Bronze Valve Guides .535".342" X .564" X 2.280'' Pont. SD Cast Iron Heads
Item #: PEP-B228-29-16
Condition:
New
Price: $98.95
Description: Pontiac 350-455 Cam Bolt & Washer 1/2-20
Item #: BPI-CAM-BOLT-KIT
Condition:
New
Price: $9.95
Description: Cam Sync HE Sensor w/o gear, Installs in Pontiac distributor hole when using front drive distributor or coil on plug ignition- Black
Item #: LPI-3P0116B
Condition:
New
Price: $449.95
Description:
6X Heads (other numbers available)
Milling optional / additional charge (let us know your desired compression ratio)
Completely ported and polished...More Details »
Item #: CC-00155
Condition:
New
Please Call for Availability
Description: Cast Valve Guides 11/32(.342") ID - .502 OD - 2 3/8" Long/Pont. Cast Iron Heads (Set)
Item #: PEP-C5006B-16
Condition:
New
Price: $26.95
Description: Pontiac Clutch Fork Pivot Stud for Bellhousing, 1967-81
Item #: APE-R167CR
Condition:
New
Price: $14.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 64-67, 73-77 (A-BODY)/71-74 (X-BODY) - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-R167H
Condition:
New
Price: $37.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 67-69 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR712P
Condition:
New
Price: $35.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 70-81 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR713P
Condition:
New
Price: $17.95
Description: 1964-77 GM Ball Stud Clutch Z Bar To Frame Bracket
Item #: APE-R167F
Condition:
New
Price: $16.95
Description: Pontiac Clutch Install Kit includes pilot bearing, thrust bearing and pressure plate bolt kit
Item #: BPI-Clutch-Install-Kit
Condition:
New
Price: $94.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-POL
Condition:
New
Price: $49.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 2 3/4, Choose Your Options (Set) BPI-SVC-WIN
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-SVC-WIN
Condition:
New
Price: $499.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 3 3/4, Choose Your Options (Set) BPI-TVC-WIN
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-TVC-WIN
Condition:
New
Price: $599.95
Description: Pontiac Dipstick (no AC)
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-2
Condition:
New
Price: $19.95
Description: Pontiac Dipstick (no AC) RAW FINISH
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-1
Condition:
New
Price: $14.95
Description: Pontiac Dipstick Tube Installation Tool, Use with N304 or factory block dipstick tubes
Item #: BPI-1001
Condition:
New
Price: $11.95
Description: Pontiac Dipstick Tube-1966-79 Upper Block Tube -Stainless Steel
Item #: AAU-N304
Condition:
New
Price: $29.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) or 305/350 GM engine Shakers**
Item #: PTF-EP-401
Condition:
New
Price: $249.95