Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
From stock Pontiac blocks to the newer IAII cast and aluminum blocks, Butler has the block that will be the foundation for your Pontiac performance engine
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
Butler Performance Products
Description: Visit our dedicated site, www.Butler-LS.com for LS assemblies and LS Performance Parts
More Details »
Item #: LS ASSEMBLY
Condition:
New
Description: Pontiac Retro-Fit Hydraulic Roller Lifters with updated Pontiac Oil Band Location (Set/16)
Item #: BPI-5884R
Condition:
New
Price: $594.95
Description: Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*
Item #: OFF-5499
Condition:
New
Contact Us
Free Shipping!
Description: This diagnostic tools lets you check your filter for contaminants.
Item #: BPI-PFM66490
Condition:
New
Price: $59.95
Description: For 3/4 dia Oil Pump Pickups
Item #: BPI-PFM66480
Condition:
New
Price: $21.95
Description: Pilot Bushing Driver, Steel, Black Oxide, 0.590 in ID Pilot Bushings, Each
Item #: ASP-ALL26115
Condition:
New
Price: $26.95
Description: Kit contains 12 in. long strings—two green .001 in. to .003 in., and one red .002 in. to .006 in.—individually packaged inside calibrated sleeves and detailed instructions
Item #: ASP-ALL96475
Condition:
New
Price: $8.99
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114C
Condition:
New
Price: $149.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114BLK
Condition:
New
Price: $149.95
Description: 1100+ Hp Capable
Titanium valves
Titanium retainers
PSI or PAC springs
FOR USE ON AFTERMARKET BLOCKS ONLY, recommended 4.310 or larger bores (4.280 minimum)
Requires offset solid roller lifters and shaft rockers
Item #: EDL-77849BP-440
Condition:
New
Price: $10,995.00
Description: NEW EARLY 69 WATER PUMP SHORT HUB 4", ALL PONT V8 (APE)
Gasket not included
Item #: APE-N140NW
Condition:
New
***SEE PART# BRW-1647***
Price: $118.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16C
Condition:
New
Price: $169.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16BLK
Condition:
New
Price: $169.95
Description: Pontiac 1964-1968 8 Bolt Water Pump- Cast Iron with gasket
Item #: BPI-WP-8B
Condition:
New
***SEE PART # BRW-1622***
Description: Pontiac 1965 389 Chrome Valve Covers (Set)
*hole for 5/8 rubber grommet on pass. side, twist-in cap/ breather in drivers side*
Item #: AAU-N221R
Condition:
New
Price: $137.95
Description: Pontiac 1966 Chrome Valve Covers-set
Pass. side- no hole/ Dr. side- hole for twist-in breather
Item #: AAU-N221T
Condition:
New
Price: $161.95
Description: Dipstick Tube for Windage Tray
Item #: AAU-N300
Condition:
New
Price: $21.95
Description: Lower Dipstick Tube w/Bracket (When Not Using a Windage Tray)
Item #: AAU-N302
Condition:
New
Price: $26.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN20C
Condition:
New
Price: $189.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN20BLK
Condition:
New
Price: $189.95
Description: Guide plates, Flat, Steel, 3/8 in., Machined for 3/8 in our shop. Pontiac, 389, 400, 421, 428, 455, for EDL Performer Pontiac Head, Set of 8
Item #: BPI-GP-38-8
Condition:
New
Price: $99.95
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1029
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 389-421 1959-65 Dipstick Block Tube- 1 of 3 Pieces For Use w/ N250, N298
Item #: APE-N252
Condition:
New
Price: $22.95
Description: Pontiac 389-421 1964-65 Upper Dipstick Tube- 1 of 3 Pieces For Use w/ N252, N298
Item #: APE-N250
Condition:
New
Price: $48.95
Description: Pontiac 389-421 1965-66 Lower Dipstick Tube For Use With Tray- 1 of 3 Pieces For Use w/ N250,N252
Item #: AAU-N298
Condition:
New
Price: $21.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-POL
Condition:
New
Price: $69.95
Description: PN257A
Gaskets included
Item #: APE-PN257A
Condition:
New
Not Available
Price: $89.95
Description: Pontiac 5/16 X 3/4 Ex Long Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025076
Condition:
New
Price: $1.95
Description: Pontiac 5/16 X 5/8 Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025068
Condition:
New
Price: $2.49