Butler Performance Inc. » Butler Performance

Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.

Butler Performance Categories

View  
Items 91-120 of 218
Dip Sticks and Tubes
No Image Available
Distributor Gears
This is from Holley/MSD engineering: The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Dowel Pins
Edelbrock Heads
Edelbrock Intakes
Edelbrock/RAIV/SD Heads
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
EFI Components
EFI Solutions- Ignition Series
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
EFI Solutions- Master Series
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
EFI Systems & Components
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
No Image Available
Engine Blocks
From stock Pontiac blocks to the newer IAII cast and aluminum blocks, Butler has the block that will be the foundation for your Pontiac performance engine
Engine Bolt Kits
Engine Cradles/Stands
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
Engine Cradles/Stands
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
No Image Available
No Image Available
No Image Available
Exhaust Header Gaskets
Fender Covers
Fender Covers
FiTech EFI Systems
Flexplates & Flywheels
Items 91-120 of 218

Butler Performance Products

Sort
View
 
Items 601-630 of 861
Description: Factory Replacement Fuel Tank with In-Tank Fuel System Included. Converts carbureted system to EFi ready fuel system. Works with almost all EFI Throttle Body Systems
Item #: BPI-EFI-TANK-SOLUTION
Condition: New
Price: $995.95

Free Shipping!

Description: Butler Performance Engine Builder Kit Includes Butler Balanced Rotating Assembly 4.250" Stroke Cast or Forged Crank/H-Beam Rods Custom machined and...More Details »
Item #: BP-ENGINE-KIT-460-474
Condition: New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $14,995.00


Description: Butler Performance Stealth/Stock Appearing Engine- Carb or EFI 4.00" Stroke 400 or 428 block Forged Crank/H-Beam Rods Ready to assemble All...More Details »
Item #: BP-ENGINE-KIT-432-439
Condition: New
Due to Popular Demand current lead time runs about 8-10 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $14,495.00


Description: Butler Performance Crate Engine in Builder Kit form- EFI or carb, Ready to assemble Includes Butler Balanced Rotating Assembly 4.500" Stroke Forged Crank/H-Beam...More Details »
Item #: BP-ENGINE-KIT-487-501
Condition: New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $15,495.00


Description: Butler Performance Stealth/Stock Appearing Engine 3.75" or 4.250" Stroke 389 block Depending on core availability- 4.092, 4.122 Bore Cast or Forged...More Details »
Item #: BP-ENGINE-KIT-395-447
Condition: New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $13,995.00


Description: Butler Performance Stealth/Stock Appearing Engine 390-425hp 3.75" Stroke 400 block Depending on core availability- 4.150, 4.155, 4.160, 4.181 Bore...More Details »
Item #: BP-ENGINE-KIT-406-412
Condition: New
Due to Popular Demand current lead time runs about 6-8 weeks Fully insured shipping will be quoted. (Usually $500-700 on average). Additional fees for residential and liftgate.
Price: $12,495.00


Description: Crosswind Port Match Service by Butler Performance
Item #: 3102INT-CRO
Condition: New
Price: $295.00


No Image Available
Description: The BEST way to get your cylinder heads to us! Save time, money, and hassle by selecting this option for shipping your cylinder heads to Butler Performance.
Item #: BPI-SHIPHEADS
Condition: New
Price: $249.95

Free Shipping!
Qty:

Description: Definitive Firebird & Trans AM Guide 1970 1/2-1981 by Rocky Rotella
Item #: BPI-CT591
Condition: New
Description: Dial Calipers, 0.001 to 6.000 in Range, Case, Stainless, Each
Item #: ASP-ALL96410
Condition: New
Price: $38.95
Qty:

Price: $32.95
Qty:

96414
Description: Dial Indicator Kit, 1 in Travel, 0.001 Increments, Magnetic Base, Kit
Item #: ASP-ALL96414
Condition: New
Price: $43.95
Qty:

Description: Pontiac Blue Paint-Metallic (66-70)
Item #: DUP-DE1616
Condition: New
Paint can only be shipped via ground services. Not available to ship Air or any USPS service due to flammable contents.
Price: $13.95
Qty:

Description: Pontiac Sky Blue Paint 59-65
Item #: DUP-DE1610
Condition: New
Paint can only be shipped via ground services. Not available to ship Air or any USPS service due to flammable contents.
Price: $13.95
Qty:

Description: Edelbrock Performer 2156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2156
Condition: New
Price: $295.00


Description: Edelbrock Performer RPM 7156 Port Match Service by Butler Performance
Item #: 3102INT-EDL-7156
Condition: New
Price: $295.00


Description: Edelbrock Torker II 5056 Port Match Service by Butler Performance
Item #: 3102INT-EDL-5056
Condition: New
Price: $295.00


Description: Edelbrock Victor 2957 Port Match Service by Butler Performance
Item #: 3102INT-EDL-2957
Condition: New
Price: $295.00


Description: We have packaged this regulator along with the ORB to -6AN adapter fittings needed to run -6AN fuel line. Also included in this kit is the plug so the regulator can be plumbed before or after the engine.
Item #: TAN-BYP7910-KIT
Condition: New
Price: $149.95

Qty:

Description: 1962-1963 Super Duty Guide Plates (Fits #980 & #127 SD Heads) (Set/8)
Item #: FMW-EN60100A
Condition: New
Price: $189.95

Qty:

Description: Mike Montanari's Custom designed and tested oil pan protection plate.
Item #: MM-ABODY-PLATE
Condition: New
Contact Us
For fastest service email us today. (866)762-7527
Description: THIS SET INCLUDES ONE OF EACH SIZE, .002,.003,.004,.005,.006,.008,.011,.012,.013,.014, .016,.018,.020,.022 AND .025.
Item #: ASP-ALL96420
Condition: New
Price: $7.95
Qty:

Description: "Black" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-BK
Condition: New
Price: $49.95

Description: "Polished" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) Firebird 1st Gen CNC Logo engraved right here in our shop
Item #: BPI-S6001-FB-POL
Condition: New
Price: $49.95

Description: "Black" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-BK
Condition: New
Price: $49.95

Description: "Polished" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) Custom Screaming Chicken CNC Logo engraved right here in our shop
Item #: BPI-S6001-TA-POL
Condition: New
Price: $49.95

Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your Carbureted fuel system
Item #: TAN-CARB-LINE-KIT45
Condition: New
Price: $309.95

Qty:

Description: Includes 25 feet of line and all or most of the fittings that you need to plumb your EFI fuel system
Item #: TAN-EFI-LINE-KIT45
Condition: New
Price: $349.95

Qty:

Description: "Black" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-BK
Condition: New
Price: $69.95


Description: "Polished" Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) GTO CNC Logo engraved right here in our shop
Item #: BPI-S6001-GTO-3D-POL
Condition: New
Price: $69.95


Items 601-630 of 861