Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
**DO NOT TORQUE ROCKER NUTS TO 20lbs AS STATED IN PONTIAC SHOP MANUALS**
Common Usage: Mild street performance to mild race
Key Benefits: Minimal maintenance, little or no valve...More Details »
Holley just brought EFI within range! Introducing Sniper EFI! It's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride!...More Details »
**Due to so many variable that can affect flat tappet cam and lifter life from break-in and beyond Flat tappet cams are subject to manufacturer’s warranty ONLY.
This is due to stringent...More Details »
Common Usage: Mild street performance to mild race
Key Benefits: Modern, aggressive roller profiles, reduced friction, low maintenance, reduced valve train noise, more power than...More Details »
Hydraulic Roller Lifters - These lifters have the same hydraulic cylinder technology and advancment as the hydraulic flat tappet version but feature a roller in place of the tappet. As the cam...More Details »
No Image Available
Butler can port match your intake or one purchased from us to any head port dimensions. We will remove material and blend the port for unrestricted airflow
Fastener Kits, Sets, and Misc fasteners for headers, carbs, oil pans, pressure plates, etc
The LS platform was introduced to Pontiac with the 98-02 Trans Am's, 04-06 GTO's, and 08-09 G8's. Butler LS specializes in the LS engine as well as many swap applications.
Visit our dedicated...More Details »
Butler Performance Products
Description: Kauffman Northwind 4150 Port Match Service by Butler Performance
Item #: 3102INT-KRE-4150
Condition:
New
Price: $195.00
Description: Kauffman Northwind 4150 Port Match Service by Butler Performance with additional required machining
Item #: 3102INT-KRE-PWE
Condition:
New
Price: $895.00
Description: Introducing the all new custom laser logo'ed leather patch insulated Pontiac Can Cooler.
Item #: BPI-Koozie-2
Condition:
New
Please Call for Availability
Description: Visit our dedicated site, www.Butler-LS.com for LS assemblies and LS Performance Parts
More Details »
Item #: LS ASSEMBLY
Condition:
New
Description: Pontiac Retro-Fit Hydraulic Roller Lifters with updated Pontiac Oil Band Location (Set/16)
Item #: BPI-5884R
Condition:
New
Price: $594.95
Description: Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*
Item #: OFF-5499
Condition:
New
Please Call for Availability
Free Shipping!
Description: Pilot Bushing Driver, Steel, Black Oxide, 0.590 in ID Pilot Bushings, Each
Item #: ASP-ALL26115
Condition:
New
Price: $24.95
Description: Kit contains 12 in. long strings—two green .001 in. to .003 in., and one red .002 in. to .006 in.—individually packaged inside calibrated sleeves and detailed instructions
Item #: ASP-ALL96475
Condition:
New
Price: $8.99
Description: Retro Style LS covers with hidden coils
Choose Your CNC Engraved Logo
Polished Aluminum
Includes Hardware and gaskets
Item #: BPI-VC-LSC-POL
Condition:
New
Price: $379.00
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114C
Condition:
New
Price: $149.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114BLK
Condition:
New
Price: $149.95
Description: 1100+ Hp Capable
Titanium valves
Titanium retainers
PSI or PAC springs
FOR USE ON AFTERMARKET BLOCKS ONLY, recommended 4.310 or larger bores (4.280 minimum)
Requires offset solid roller lifters and shaft rockers
Item #: EDL-77849BP-440
Condition:
New
Price: $10,995.00
Description: NEW EARLY 69 WATER PUMP SHORT HUB 4", ALL PONT V8 (APE)
Gasket not included
Item #: APE-N140NW
Condition:
New
Not Available
***SEE PART# BRW-1647***
Price: $118.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16C
Condition:
New
Price: $169.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16BLK
Condition:
New
Price: $169.95
Description: Pontiac 1964-1968 8 Bolt Water Pump- Cast Iron with gasket
Item #: BPI-WP-8B
Condition:
New
***SEE PART # BRW-1622***
Description: Pontiac 1965 389 Chrome Valve Covers (Set)
*hole for 5/8 rubber grommet on pass. side, twist-in cap/ breather in drivers side*
Item #: AAU-N221R
Condition:
New
Price: $137.95
Description: Pontiac 1966 Chrome Valve Covers-set
Pass. side- no hole/ Dr. side- hole for twist-in breather
Item #: AAU-N221T
Condition:
New
Price: $161.95
Description: Dipstick Tube for Windage Tray
Item #: AAU-N300
Condition:
New
Price: $21.95
Description: Lower Dipstick Tube w/Bracket (When Not Using a Windage Tray)
Item #: AAU-N302
Condition:
New
Price: $26.95
Description: Guide plates, Flat, Steel, 3/8 in., Machined for 3/8 in our shop. Pontiac, 389, 400, 421, 428, 455, for EDL Performer Pontiac Head, Set of 8
Item #: BPI-GP-38-8
Condition:
New
Price: $99.95
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1029
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 389-421 1959-65 Dipstick Block Tube- 1 of 3 Pieces For Use w/ N250, N298
Item #: APE-N252
Condition:
New
Price: $22.95
Description: Pontiac 389-421 1964-65 Upper Dipstick Tube- 1 of 3 Pieces For Use w/ N252, N298
Item #: APE-N250
Condition:
New
Price: $48.95
Description: Pontiac 389-421 1965-66 Lower Dipstick Tube For Use With Tray- 1 of 3 Pieces For Use w/ N250,N252
Item #: AAU-N298
Condition:
New
Price: $21.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-POL
Condition:
New
Price: $69.95
Description: PN257A
Gaskets included
Item #: APE-PN257A
Condition:
New
Not Available
Price: $89.95
Description: Pontiac 5/16 X 3/4 Ex Long Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025076
Condition:
New
Price: $1.95
Description: Pontiac 5/16 X 5/8 Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025068
Condition:
New
Price: $2.49