Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
The oiling system is vital to the life of an engine. Butler chooses to partner with experts in the industry that supplies oil pumps and oil pump accessories for performance Pontiacs.
BP ports more Pontiac cylinder heads than anyone in the world. After years of extensive R&D both on the flow bench and on our track, we have developed some of the best performing round port and...More Details »
These distributors do not contain an integrated ignition module and must be controlled with an external cd box. Designed for street performance or racing applications. These normally have an...More Details »
**Due to so many variable that can affect flat tappet cam and lifter life from break-in and beyond Flat tappet cams are subject to manufacturer’s warranty ONLY.
This is due to stringent...More Details »
Ram Air Series Cams- Features the Original 744, 067, 068, and 041 Style Reproduction Cams and the Exclusive Ram Air Retrofit Hyd Roller Cams ground by Comp Cams exclusively for Butler Performance
Edelbrock Performer RPM heads produce outstanding horsepower with excellent low speed torque and throttle response. Designed for 1965-79 389-455 c.i.d. Pontiac engines, these heads are patterned...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
The ready to run are exactly as they sound and ready to run with minimal requirements for installation. Inside the housing there is an ignition module that produces a much hotter spark which will...More Details »
EZ-EFI 2.0
• Carb-replacement system supports stock-to-1200 HP engines
• Advanced color touchscreen hand-held doubles as sensor dash
• Setup Wizard guides you through start-up...More Details »
No Image Available
Butler recommended valves- Pontiac Cast Iron Heads (non RAIV/SD) has an install height of 1.600" with stock length valves. More Details »
Fuel Tanks and Tank Kits for late model Pontiacs. Including EFI ready tanks with Pumps and Sending Units
All Tanks Inc Fuel Tanks are E85 Compatible. You Must Source your own Viton Gasket. The...More Details »
Butler Performance Products
Description: Pontiac Retro-Fit Hydraulic Roller Lifters (Set/16)
Item #: BPI-5884
Condition:
New
Please Call for Availability
See 5884R for same lifter with revised oil band location
Description: Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*
Item #: OFF-5499
Condition:
New
Please Call for Availability
Free Shipping!
Description: Pilot Bushing Driver, Steel, Black Oxide, 0.590 in ID Pilot Bushings, Each
Item #: ASP-ALL26115
Condition:
New
Price: $24.95
Description: Kit contains 12 in. long strings—two green .001 in. to .003 in., and one red .002 in. to .006 in.—individually packaged inside calibrated sleeves and detailed instructions
Item #: ASP-ALL96475
Condition:
New
Price: $8.99
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114C
Condition:
New
Price: $149.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114BLK
Condition:
New
Price: $149.95
Description: 1100+ Hp Capable
Titanium valves
Titanium retainers
PSI or PAC springs
FOR USE ON AFTERMARKET BLOCKS ONLY, recommended 4.310 or larger bores (4.280 minimum)
Requires offset solid roller lifters and shaft rockers
Item #: EDL-77849BP-440
Condition:
New
Price: $10,995.00
Description: NEW EARLY 69 WATER PUMP SHORT HUB 4", ALL PONT V8 (APE)
Gasket not included
Item #: APE-N140NW
Condition:
New
Not Available
***SEE PART# BRW-1647***
Price: $118.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16C
Condition:
New
Price: $169.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16BLK
Condition:
New
Price: $169.95
Description: Pontiac 1964-1968 8 Bolt Water Pump- Cast Iron with gasket
Item #: BPI-WP-8B
Condition:
New
***SEE PART # BRW-1622***
Description: Pontiac 1965 389 Chrome Valve Covers (Set)
*hole for 5/8 rubber grommet on pass. side, twist-in cap/ breather in drivers side*
Item #: AAU-N221R
Condition:
New
Price: $137.95
Description: Pontiac 1966 Chrome Valve Covers-set
Pass. side- no hole/ Dr. side- hole for twist-in breather
Item #: AAU-N221T
Condition:
New
Price: $161.95
Description: Dipstick Tube for Windage Tray
Item #: AAU-N300
Condition:
New
Price: $21.95
Description: Lower Dipstick Tube w/Bracket (When Not Using a Windage Tray)
Item #: AAU-N302
Condition:
New
Price: $26.95
Description: Guide plates, Flat, Steel, 3/8 in., Machined for 3/8 in our shop. Pontiac, 389, 400, 421, 428, 455, for EDL Performer Pontiac Head, Set of 8
Item #: BPI-GP-38-8
Condition:
New
Price: $99.95
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1028
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 326-455CI Storage Port Covers Set
Hardware not included
Item #: BPI-1029
Condition:
New
Price: $49.95
Sale: $29.95
Save: 40%
Save: $20.00
Description: Pontiac 389-421 1959-65 Dipstick Block Tube- 1 of 3 Pieces For Use w/ N250, N298
Item #: APE-N252
Condition:
New
Price: $22.95
Description: Pontiac 389-421 1964-65 Upper Dipstick Tube- 1 of 3 Pieces For Use w/ N252, N298
Item #: APE-N250
Condition:
New
Price: $48.95
Description: Pontiac 389-421 1965-66 Lower Dipstick Tube For Use With Tray- 1 of 3 Pieces For Use w/ N250,N252
Item #: AAU-N298
Condition:
New
Price: $21.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-BK
Condition:
New
Price: $69.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-POL
Condition:
New
Price: $69.95
Description: PN257A
Gaskets included
Item #: APE-PN257A
Condition:
New
Not Available
Price: $89.95
Description: Pontiac 5/16 X 3/4 Ex Long Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025076
Condition:
New
Price: $1.95
Description: Pontiac 5/16 X 5/8 Dowel Pin-For Block / Head Deck Single
Item #: MSC-06025068
Condition:
New
Price: $2.49
Description: Pontiac 5/16 X 5/8 Dowel Pins-For Block / Head Deck Set/4
Item #: BPI-Bolt-Head-Dowel-Pin-Set
Condition:
New
Price: $6.95
Description: 5/16" x 1" EX Long Dowel Pins- for 4-Bolt Main Caps-Center 3 Set/6
Item #: BPI-Bolt-Main-Dowel-Pin-XL-Set
Condition:
New
Price: $9.95
Description: 5/16" x 1" Ex Long Dowel Pins- for 4-Bolt Main Caps-Center 3 Single
Item #: MSC-06025100
Condition:
New
Price: $2.49
Description: 5/16" x 3/4" Dowel Pins- for 4-Bolt Main Caps-Center 3 Single
Item #: MSC-06025084
Condition:
New
Price: $2.49