Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Edelbrock Performer RPM heads produce outstanding horsepower with excellent low speed torque and throttle response. Designed for 1965-79 389-455 c.i.d. Pontiac engines, these heads are patterned...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
The ready to run are exactly as they sound and ready to run with minimal requirements for installation. Inside the housing there is an ignition module that produces a much hotter spark which will...More Details »
EZ-EFI 2.0
• Carb-replacement system supports stock-to-1200 HP engines
• Advanced color touchscreen hand-held doubles as sensor dash
• Setup Wizard guides you through start-up...More Details »
No Image Available
Butler recommended valves- Pontiac Cast Iron Heads (non RAIV/SD) has an install height of 1.600" with stock length valves. More Details »
Fuel Tanks and Tank Kits for late model Pontiacs. Including EFI ready tanks with Pumps and Sending Units
All Tanks Inc Fuel Tanks are E85 Compatible. You Must Source your own Viton Gasket. The...More Details »
Butler Performance is now an authorized reseller of Tremec Transmissions. These are bare transmissions only and ships in 2-3 business days.
Valley pans do a great job helping eliminate oil consumption through the pcv valve. Butler Performance has it's own custom line of custom Pontiac parts produced and also stocks many from ALL Pontiac, Tomahawk, and more.
Butler Performance Products
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 2 3/4, Choose Your Options (Set) BPI-SVC-FAB
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-SVC-FAB
Condition:
New
Price: $519.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 3 1/2, Choose Your Options (Set) BPI-TVC-FAB
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-TVC-FAB
Condition:
New
Price: $559.95
Description: Pontiac D-PORT Stock Replacement Head Bolt Kit With Accessory Studs, 64&66 (May not work on 1965 Heads)
Item #: ITU-13371
Condition:
New
Not Available
Price: $113.95
Description: Pontiac Dipstick (no AC)
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-2
Condition:
New
Price: $22.95
Description: Pontiac Dipstick (no AC) RAW FINISH
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-1
Condition:
New
Price: $17.95
Description: Pontiac Dipstick Tube Installation Tool, Use with N304 or factory block dipstick tubes
Item #: BPI-1001
Condition:
New
Price: $11.95
Description: Pontiac Dipstick Tube-1966-79 Upper Block Tube -Stainless Steel
Item #: AAU-N304
Condition:
New
Price: $29.95
Description: Pontiac A/C Dipstick 1968-79 RAW FINISH
*28 3/4" long from top of bell to tip*
Item #: BPI-9405R-4
Condition:
New
Price: $21.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) or 305/350 GM engine Shakers**
Item #: PTF-EP-401BK
Condition:
New
Price: $279.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) or 305/350 GM engine Shakers**
Item #: PTF-EP-401
Condition:
New
Price: $259.95
Description: For use with engines making more than 450hp- Requires taller fiberglass Mega Scoop
Item #: PTF-EP-401T
Condition:
New
Price: $279.95
Description: Keep your engine clean from dust and elements
2mm Plastic Engine Bag, EACH
23" x 17" x 50"
Fits Engine Short Block
Item #: PIO-EB-10-1
Condition:
New
Price: $3.95
as low as: $2.49
5 or more
Description: Fits standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet and Carter AFB carburetors
Item #: RPC-S7903
Condition:
New
Price: $29.95
Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis/70 LeMans, Set BPI-MM5
Description: Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis
Use the original chassis specific frame and motor mounts
Item #: BPI-MM5
Condition:
New
Price: $54.95
Description: Adapt Pontiac engine to Chevy/GM Transmission
Item #: BPI-1034
Condition:
New
Price: $74.95
Description: Features Butler Performance Pontiac Flag Logo Leather Patch on the front
Item #: BPI-HAT-1510
Condition:
New
Price: $29.95
Description: 1/2"-20 x .697 uhl, 11/16" Wrenching, SCM-4140 Alloy Steel, 200,000 PSI, Set of 6
Item #: BPI-Bolt-FLXPLT
Condition:
New
Price: $26.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ Early 60's 389/421 to adapt from 2 9/16" crank hub to 2 3/4" flywheel
Item #: BPI-1024
Condition:
New
Price: $49.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ early model 2.5 hub cranks to 2.75 flywheel
Item #: BPI-1025
Condition:
New
Price: $29.95
Description: The UVPM (Universal Vacuum Pump Mount) is our most sturdy design bracket available for mounting a Vacuum Pump to your engine or motor plate. This 1/2" thick 6061 T6 Aluminum mount is designed for a...More Details »
Item #: GZM-UVPM102
Condition:
New
Price: $99.95
Description: Complete Pontiac HEI Distributor Kit. Includes Pontiac S3922 HEI Distributor (Black or Red) with integrated coil,Plug Wires (Black or Red), and Wire Separators
Item #: RPC-KIT-DISTR
Condition:
New
Price: $229.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-POL
Condition:
New
Price: $49.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Judge CNC Logo engraved right here in our shop
Item #: BPI-S6001-JUDGE-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Judge CNC Logo engraved right here in our shop
Item #: BPI-S6001-JUDGE-POL
Condition:
New
Price: $49.95
No Image Available
Description: Keep your engine clean from dust and elements
3mil Plastic Engine Bag, EACH
44"X 52"
Fits Engine Short Block
Item #: GMA-BE44
Condition:
New
Price: $8.95
as low as: $5.00
5 or more
Description: Pontiac L-Brackets to Bolt Manifolds on 1972 Heads (Set) They use the drilled and tapped hole on the front (or back) of the heads. If you have heads that have the pad, but are not drilled and tapped - you can not use the head L brackets.
Item #: SPE-HLB-02
Condition:
New
Price: $87.95
Description: Pontiac L-Brackets to Bolt Headers on 1972 Heads (Set) Allows use of headers (not manifolds) on 1972 heads. They use the drilled and tapped hole on the front (or back) of the heads. If you have...More Details »
Item #: SPE-HLB-01
Condition:
New
Price: $87.95
Description: Protect your Pontiac from dents, dings, and chemicals.
Item #: BPI-1037
Condition:
New
New- In Stock
Price: $24.95
as low as: $14.95
2 or more
Description: Pontiac Windage Tray for IA2/all Pontiac V-8's
Works on all strokes including up to 4.500"
Item #: SPE-WT4
Condition:
New
Price: $259.95