Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: Oil Pump Drive Shaft 1/8" longer for IAII AFTERMARKET Blocks ONLY
Does not have tangs to hold shaft in when installed from the bottom, install through dist. hole
Item #: ALL-OPDS-125
Condition:
New
Price: $32.95
Description: Pontiac Engine Cradle 1961-79 w/ Hardware Bolt Kit- Black Powder Coat Finish
1/2" Heavy Duty Casters available as an add-on
Item #: ASP-10144
Condition:
New
Price: $119.95
Description: One-Piece, Aluminum, Water Pump Backing Plate, Two Coolant Inserts, Pontiac V8
Item #: ASP-90019
Condition:
New
Price: $219.95
Description: Pontiac Standard Length High Performance Hardened Oil Pump Driveshaft
For stock blocks only
Does not have tangs to hold shaft in when installed from the bottom, install through dist. hole
Item #: ALL-OPDS-STD
Condition:
New
Price: $34.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits. Now available in CNC Ported Versions
Item #: BPI-HB-002-DP-325-72
Condition:
New
Current estimated ship time is 2-3 weeks or less
Ships1-2 weeks
Price: $3,699.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits. Now available in CNC Ported Versions
Item #: BPI-HB-002-RD-325-72
Condition:
New
Current estimated ship time is 2-3 weeks or less
Ships1-2 weeks
Price: $3,599.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $3,099.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,999.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-003-RD-72
Condition:
New
Please Call for Availability
Ships 1-2Weeks
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $2,899.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,799.95
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM
Condition:
New
Please Call for Availability
Aluminum IAII Builder Kit by Butler, 700+hp Pump Gas 505-535 cu.in. w/ IAII Block, Ready to Assemble
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM+
Condition:
New
Please Call for Availability
Description: AN Wrench
Single End
Choose -6 to -16 AN
Aluminum
Anodized
Each
Item #: ASP-ALL111
Condition:
New
Price: $16.95
Description: Arnie “the Farmer” Beswick was called “the consummate underdog” by Hot Rod magazine. While there was good reason, there is much more to his unbelievable career.
Item #: BPI-CT664
Condition:
New
Price: $34.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10533
Condition:
New
Price: $69.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10633
Condition:
New
Price: $69.95
Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A
Condition:
New
Price: $149.95
Description: Drop Base Shaker Assembly For Victor Intake and 1970-76 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3A
Condition:
New
Price: $499.95
Description: Drop Base Shaker Assembly For Victor Intake and 1977-79 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3B
Condition:
New
Price: $499.95
Description: Pontiac Drop Base Shaker Pan for 1970-72 T/A w/Edelbrock RPM Intake
**Requires HP Holley/No Choke**
Item #: BPR-2A
Condition:
New
Price: $499.95
Description: Lift .447"/.455"
Duration 256°/268°
RPM Range 1000-5200
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-221-4
Condition:
New
Price: $479.95
Description: Lift .462"/.470"
Duration 262°/270°
RPM Range 1300-5500
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-222-4
Condition:
New
Price: $479.95
Description: Lift .477"/.480"
Duration 268°/280°
RPM Range 1600-5800
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-223-4
Condition:
New
Price: $479.95
Description: Lift: .488''/.491''
Duration: 274°/286°
RPM Range: 1800-6000
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the...More Details »
Item #: BPI-CL-51-224-4
Condition:
New
Price: $479.95
Description: Lift: .507''/.510''
Duration: 284°/296°
RPM Range: 2300-6500
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and...More Details »
Item #: BPI-CL-51-225-4
Condition:
New
Price: $479.95
Description: Works great for Pontiac Harmonic Balancer honing and Timing Gear.
Item #: BPI-BC11418
Condition:
New
Price: $34.95
Description: Works great for Pontiac Cam Gears honing.
Item #: BPI-BC10018
Condition:
New
Price: $29.95
Description: "Polished" or Black Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
"(choose your engine size)" CNC Logo engraved right here in our shop
Item #: BPI-S6001-CUIN
Condition:
New
Made to order in our own cnc shop. Ships in 3-5 business days
Price: $69.95
as low as: $49.95
2 or more
Description: 1965 tri-power thermostat housing
Item #: AAU-N140A
Condition:
New
Price: $43.95