Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Not only are breathers and oil caps necessary for a good performing engine but they can add to the look as well. Shop breathers and oil caps here at Butler.
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
One of the best ways to add style to your engine is with custom valve covers. Butler Performance has a custom line available in Black, Aluminum, or polished as well as many other brands such as PRW and RPC.
Covers for Pontiac GTO, Trans Am, and G8 with GM/LS Based Engines
No Image Available
Butler Performance has built many performance engines over the last three decades. Each of these engines has the benefit of high-quality part combinations that have been engineered and tested in...More Details »
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
Butler Performance Products
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $3,099.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,999.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-003-RD-72
Condition:
New
Contact Us
Ships 1-2Weeks
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $2,899.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,799.95
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM
Condition:
New
Contact Us
Aluminum IAII Builder Kit by Butler, 700+hp Pump Gas 505-535 cu.in. w/ IAII Block, Ready to Assemble
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM+
Condition:
New
Contact Us
Description: AN Wrench
Single End
Choose -6 to -16 AN
Aluminum
Anodized
Each
Item #: ASP-ALL111
Condition:
New
Price: $16.95
Description: Arnie “the Farmer” Beswick was called “the consummate underdog” by Hot Rod magazine. While there was good reason, there is much more to his unbelievable career.
Item #: BPI-CT664
Condition:
New
Price: $34.95
Description: ARP Crank Pulley Fastener Kit
Includes washers
Item #: BPI-Bolt-Kit-CRK-ARP
Condition:
New
Price: $11.95
No Image Available
Description: Pontiac 1961-63 Timing Cover Seal, Cork
Item #: BGA-2203
Condition:
New
Price: $7.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10533
Condition:
New
Price: $69.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10633
Condition:
New
Price: $69.95
Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A
Condition:
New
Price: $149.95
Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A-BP
Condition:
New
Price: $199.95
Description: Drop Base Shaker Assembly For Victor Intake and 1970-76 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3A
Condition:
New
Price: $499.95
Description: Drop Base Shaker Assembly For Victor Intake and 1977-79 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3B
Condition:
New
Price: $499.95
Description: Pontiac Drop Base Shaker Pan for 1970-72 T/A w/Edelbrock RPM Intake
**Requires HP Holley/No Choke**
Item #: BPR-2A
Condition:
New
Price: $499.95
Description: Lift .447"/.455"
Duration 256°/268°
RPM Range 1000-5200
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-221-4
Condition:
New
Price: $479.95
Description: Lift .462"/.470"
Duration 262°/270°
RPM Range 1300-5500
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-222-4
Condition:
New
Price: $479.95
Description: Lift .477"/.480"
Duration 268°/280°
RPM Range 1600-5800
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-223-4
Condition:
New
Price: $479.95
Description: Lift: .488''/.491''
Duration: 274°/286°
RPM Range: 1800-6000
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the...More Details »
Item #: BPI-CL-51-224-4
Condition:
New
Price: $479.95
Description: Lift: .507''/.510''
Duration: 284°/296°
RPM Range: 2300-6500
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and...More Details »
Item #: BPI-CL-51-225-4
Condition:
New
Price: $479.95
Description: Works great for Pontiac Harmonic Balancer honing and Timing Gear.
Item #: BPI-BC11418
Condition:
New
Price: $34.95
Description: Works great for Pontiac Cam Gears honing.
Item #: BPI-BC10018
Condition:
New
Price: $29.95
Description: "Polished" or Black Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
"(choose your engine size)" CNC Logo engraved right here in our shop
Item #: BPI-S6001-CUIN
Condition:
New
Made to order in our own cnc shop. Ships in 3-5 business days
Price: $69.95
as low as: $49.95
2 or more
Description: 1965 tri-power thermostat housing
Item #: AAU-N140A
Condition:
New
Price: $43.95
Description: 1966 tri-power thermostat housing
Item #: AAU-N140B
Condition:
New
Price: $43.95
Description: 550-600 HP Pump Gas Complete Top End package with Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 325+CFM, Complete
Pump gas on a 400-428 engine. require high octane for 455 + cu.in. engines
Item #: BPI-TEP-RD-72HR-325
Condition:
New
Ship in 2-3 weeks
Price: $5,795.00
Free Shipping!
Description: 550-600 HP Pump Gas Complete Top End package with Pontiac 1967-79 400-455 87cc Edelbrock Round Port Heads, Ported to 325+CFM, Complete
Item #: BPI-TEP-RD-87HR-325
Condition:
New
Ship in 2-3 weeks
Price: $5,795.00
Free Shipping!