Butler Performance Inc. » Butler Performance

Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.

Butler Performance Categories

View  
Items 61-90 of 202
Carb Accessories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Carb Gaskets
No Image Available
Cast Iron Heads
Closeouts
Clutches
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Conversion and Replacement Kits
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
Copper Head Gaskets
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines). Our Pontiac crate...More Details »
No Image Available
D-Port Cylinder Heads
Aluminum D - Port Cylinder Heads These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
D-Port Ported Cylinder Heads
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
Dip Sticks and Tubes
No Image Available
Distributor Gears
This is from Holley/MSD engineering: The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Dowel Pins
Edelbrock Heads
Edelbrock Intakes
Edelbrock/RAIV/SD Heads
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
EFI Components
EFI Solutions- Ignition Series
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
EFI Solutions- Master Series
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
EFI Systems & Components
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
No Image Available
Items 61-90 of 202

Butler Performance Products

Sort
View
 
Items 121-150 of 824
Description: 1-1/4-12 Straight Thread 7/16 in. Bung Height OD of weld in rail- 1.490"
Item #: BPI-VC-10005
Condition: New
Price: $49.95
Qty:

Description: 1-1/4-12 Straight Thread 7/16 in. Bung Height OD of weld in rail- 1.490"
Item #: BPI-VC-10005-BK
Condition: New
Price: $59.95

Qty:

SOLD
Description: Butler custom built 467 cuin 400 Block Pump Gas Holley Carbureted Engine. 630+ hp 620 lbs tq Butler 340 cfm Ported Edelbrock Heads
Item #: BP-112477-ENG
Condition: New
Sold
Free Delivery in Cont. US
Free Ground Shipping

Description: Powder coated black or polished Air Cleaner Lid with custom milled engraving of your favorite Pontiac Logo
Item #: BPI-S6900
Condition: New
Price: $149.95


Description: Stop throwing away gaskets and money and customize your own Butler Gasket Kit
Item #: BPI-Gasket-Kit-Engine
Condition: New
Price: $119.95


Description: Custom Pontiac Procharger Cog Bracket Kit No head unit or drive pulleys included
Item #: BPI-PCH-Kit-COG-BRA
Condition: New
Ships in 2-4 weeks
Price: $3,195.00

Free Shipping!

Description: Custom Pontiac Procharger Complete Kits
Item #: BPI-PCH-Kit-COG
Condition: New
Ships in 2-4 weeks
Price: $8,995.00

Free Shipping!

Description: Custom Pontiac Procharger Serpentine Bracket Kit No head unit or drive pulleys included
Item #: BPI-PCH-Kit-SERP-BRA
Condition: New
Ships in 2-4 weeks
Price: $2,895.00

Free Shipping!

Description: Custom Pontiac Procharger Serpentine Complete Kits, up to 920 hp
Item #: BPI-PCH-Kit-SERP
Condition: New
Ships in 4-6 Weeks
Price: $8,595.00

Free Shipping!

Description: Need something better than standard out of the box heads? These are built and blueprinted by Butler Performance Pontiac in our shop.
Item #: BPI-65cc-EDL-DPort-FT-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,495.00


Description: Need something better than standard out of the box heads? These are built and blueprinted by Butler Performance Pontiac in our shop.
Item #: BPI-65cc-EDL-DPort-HR-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,495.00


Description: Need something better than standard out of the box heads? These are built and blueprinted by Butler Performance Pontiac in our shop.
Item #: BPI-72cc-EDL-DPort-FT-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,395.00


Description: Need something better than standard out of the box heads? These are built and blueprinted by Butler Performance Pontiac in our shop.
Item #: BPI-72cc-EDL-DPort-HR-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,395.00


Description: Need something better than standard out of the box heads? These are built and blueprinted by Butler Performance Pontiac in our shop.
Item #: BPI-87cc-EDL-DPort-FT-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,195.00


Description: Pontiac 1967-79 400-455 87cc Edelbrock DPort Heads, Butler Built, Complete w/ Ferrea Stainless Steel Valves, Performance Valve Springs (Matched to Cam), Chromoly Locks, Retainers, Locators & Viton...More Details »
Item #: BPI-87cc-EDL-DPort-HR-NP
Condition: New
Current estimated ship time is 2-3 weeks or less
Price: $3,195.00


Description: 1.440 Dual Springs 162 @ 1.800 / 177 @ 1.750, 374 @ 1.180, Coil Bind 1.070 (Set)
Item #: DHP-S-084-283-16
Condition: New
Price: $124.95


Compare to Edelbrock 2055 Power Package
Description: Estimated @ 460hp 538 lbs/ft*. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain, Performance...More Details »
Item #: BPI-TEP-DP-72FT
Condition: New
Price: $4,495.00

Free Shipping!

Compare to Edelbrock 2055 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-DP-72HR
Condition: New
Price: $5,195.00

Free Shipping!

Compare to Edelbrock 2054 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-DP-87HR
Condition: New
Price: $5,195.00

Free Shipping!

Compare to Edelbrock 2053 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-RD-72HR
Condition: New
Price: $4,995.00

Free Shipping!

Compare to Edelbrock 2057 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-RD-87HR
Condition: New
Price: $4,995.00

Free Shipping!

Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 202/210 Lobe Separation Angle: 111 Hyd. Roller
Item #: CCA-BP-RA-067-HR-CL
Condition: New
Price: $1,119.95


Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 202/210 Lobe Separation Angle: 111 Hyd. Roller
Item #: CCA-BP-RA-067-HR-K
Condition: New
Price: $1,589.95


Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 202/210 Lobe Separation Angle: 111 Hyd. Roller
Item #: CCA-BP-RA-067-HR
Condition: New
Price: $569.95

Qty:

Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler INT/EXH @.050 200/210 284/293 Lift .405/.405 @1.5 Ratio LS 111 Hyd. Flat Tappet 852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-067-FT-CL
Condition: New
Price: $529.95

Qty:

Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler INT/EXH @.050 200/210 244/254 Lift .405/.405 @1.5 Ratio LS 111 Hyd. Flat Tappet
Item #: CCA-BP-RA-067-FT
Condition: New
Price: $299.95

Qty:

Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 212/226 Lobe Separation Angle: 115 Hyd. Roller
Item #: CCA-BP-RA-068-HR-CL
Condition: New
Price: $1,119.95


Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 212/226 Lobe Separation Angle: 115 Hyd. Roller
Item #: CCA-BP-RA-068-HR-K
Condition: New
Price: $1,589.95


Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler Lift with 1.5 ratio rockers: .450/.450 Lift with 1.65 ratio rockers: .495/.495 Duration: 212/226 Lobe Separation Angle: 115 Hyd. Roller
Item #: CCA-BP-RA-068-HR
Condition: New
Price: $569.95

Qty:

Description: INT/EXH @.050 212/225 256/268 Lift .405/.405 @1.5 Ratio LS 115 Hyd. Flat Tappet 852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-068-FT-CL
Condition: New
Price: $529.95

Qty:

Items 121-150 of 824