Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
This is from Holley/MSD engineering:
The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
Butler Performance Products
Description: INT/EXH @.050 212/225 256/268
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-068-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-CL
Condition:
New
Price: $1,119.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-K
Condition:
New
Price: $1,589.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-FT-744-CL
Condition:
New
Price: $529.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-744-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-CL
Condition:
New
Price: $1,119.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-K
Condition:
New
Price: $1,589.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1969/1970 Ram Air IV factory 345/370hp...More Details »
Item #: CCA-BP-RA-041-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT-CL
Condition:
New
Price: $529.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT
Condition:
New
Price: $299.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble. -6 Fittings and hose
Item #: BPI-1007FUEL-6
Condition:
New
Price: $149.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble. -8 Fittings and hose
Item #: BPI-1007FUEL-8
Condition:
New
Price: $149.95
Description: Fuel Pump to Carb inlet kit for Holley or Carter fuel pump to Qjet carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1009FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Holley or Carter fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1010FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Edelbrock fuel pump to Qjet carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1011FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Edelbrock fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1012FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Qjet carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1008FUEL
Condition:
New
Price: $149.95
Description: Butler Performance Military T-Shirt
Item #: BPI-TS-BP1621
Condition:
New
Closeout- Making room for new styles
Price: $27.95
Sale: $20.00
Save: 28%
Save: $7.95
Description: Pontiac Hardened Oil Pump Drive Shaft- recommended and used in BP engines
Item #: BPI-OPDS-54
Condition:
New
Price: $22.95
Description: PA Series EFI Gas Tank Conversion Module. This In-Tank Fuel Pump module can be used to retrofit an internal fuel pump into your original gas tank.
Item #: TAN-PA2-4-6
Condition:
New
Price: $225.00
Description: Don't be fooled by cheap counterfeit Walbro fuel pumps. These are the real deal. We only rely on Genuine Walbro / TI Automotive fuel pumps. This 255 lph pump is good for up to 600 hp at 60 psi.
Item #: TAN-GSL392
Condition:
New
Price: $109.95
Description: Socket to install/remove PP475 oil galley plug behind distributor
Item #: BPI-Oil-Galley-Plug-Socket
Condition:
New
Price: $21.95
Description: Butler Performance Military Tan T-Shirt
Item #: BPI-TS-BP1613T
Condition:
New
Price: $27.95
Sale: $20.00
Save: 28%
Save: $7.95
Description: Butler Performance American Pontiac T-Shirt.
Item #: BPI-TS-BP1610
Condition:
New
Price: $27.95
Description: Oil Pan Reinforcement Plates
Item #: APE-N325P
Condition:
New
Price: $14.95
Description: PCV Valve Grommet For Pont. Valey Pan and Tomahawk Valley Pan TPP-TP-041S with 1226 PCV
Item #: MOT-42054
Condition:
New
Price: $5.95
Description: This valley pan is a reproduction of a stock 2-piece design for 1968 and up that has been modified to clear all solid & hyd roller lifters **Not for Use w/ EGR Intakes, 1964 and earlier Tri-powers or 301**.
Item #: TPP-TP-041S
Condition:
New
Price: $159.95
Description: 1/8" Stock Pontiac Cork Valve Cover Gaskets (Set)
Item #: SPM-VS7035-CK-2
Condition:
New
Price: $14.95
Description: Butler Performance 11 Bolt Water Pump Fastener Kit, 22pc
Hex Head Stainless Steel
Item #: ABO-Kit-WP-11B
Condition:
New
Price: $15.95