Butler Performance Inc. » Butler Performance

Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.

Butler Performance Categories

View  
Items 91-120 of 218
No Image Available
Distributor Gears
This is from Holley/MSD engineering: The PRD13906 is machined from 1144 Cold Rolled Steel, and it is case hardened via salt bath ferritic nitrocarburizing – what we refer to as QPQ. It...More Details »
Dowel Pins
Edelbrock Heads
Edelbrock Intakes
Edelbrock/RAIV/SD Heads
Butler recommended- Pontiac Edelbrock and RAIV/SD Heads have an install height of 1.800" with stock length valves. More Details »
EFI Components
EFI Solutions- Ignition Series
Full EFI solutions with complete ignition systems. Take the guess work out of the timing options for the EFI systems. Butler has years of experience in Pontiac EFI timing. Let us make the kit...More Details »
EFI Solutions- Master Series
Need a complete EFI and Tank setup for your Pontiac? We have put together complete solutions for converting your car from Carb to EFI including EFI, Tank, in-tank pump, and all the necessary lines and fittings needed.
EFI Systems & Components
Ready to update your carbureted system to an electronic fuel injection system? Butler Performance has been installing and testing many systems from FAST, Edelbrock, Holley, and more for a long...More Details »
No Image Available
Engine Blocks
From stock Pontiac blocks to the newer IAII cast and aluminum blocks, Butler has the block that will be the foundation for your Pontiac performance engine
Engine Bolt Kits
Engine Cradles/Stands
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
Engine Cradles/Stands
Transport or store your Pontiac engine on an engine cradle from Butler Performance. These can be uses with or without casters and can even be fastened to a pallet to ship your entire engine safe and securely.
No Image Available
No Image Available
No Image Available
Exhaust Header Gaskets
Fender Covers
Fender Covers
FiTech EFI Systems
Flexplates & Flywheels
Fuel Filters
Fuel Pumps- In-Tank Carbureted
For Carbureted applications. These pumps can be installed in new tanks or retrofit for your existing stock or stock replacement tank.
Items 91-120 of 218

Butler Performance Products

Sort
View
 
Items 91-120 of 858
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-72
Condition: New
Current estimated ship time is 3-5 Business Days or less
Price: $3,099.95


Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-72
Condition: New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,999.95


Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-003-RD-72
Condition: New
Contact Us
Ships 1-2Weeks

For fastest service email us today. (866)762-7527
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-87
Condition: New
Current estimated ship time is 3-5 Business Days or less
Price: $2,899.95


Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-87
Condition: New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,799.95


Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM
Condition: New
Contact Us
For fastest service email us today. (866)762-7527
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM+
Condition: New
Contact Us
For fastest service email us today. (866)762-7527
Description: AN Wrench Single End Choose -6 to -16 AN Aluminum Anodized Each
Item #: ASP-ALL111
Condition: New
Price: $16.95

Description: Arnie “the Farmer” Beswick was called “the consummate underdog” by Hot Rod magazine. While there was good reason, there is much more to his unbelievable career.
Item #: BPI-CT664
Condition: New
Price: $34.95
Qty:

Description: ARP Crank Pulley Fastener Kit Includes washers
Item #: BPI-Bolt-Kit-CRK-ARP
Condition: New
Price: $11.95

No Image Available
Description: Pontiac 1961-63 Timing Cover Seal, Cork
Item #: BGA-2203
Condition: New
Price: $7.95
Qty:

Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10533
Condition: New
Price: $69.95

Qty:

Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10633
Condition: New
Price: $69.95

Qty:

Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A
Condition: New
Price: $149.95

Qty:

Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A-BP
Condition: New
Price: $199.95

Qty:

Description: Drop Base Shaker Assembly For Victor Intake and 1970-76 Firebrd-T/A **Requires HP Holley / No Choke**
Item #: BPR-3A
Condition: New
Price: $499.95

Qty:

Description: Drop Base Shaker Assembly For Victor Intake and 1977-79 Firebrd-T/A **Requires HP Holley / No Choke**
Item #: BPR-3B
Condition: New
Price: $499.95

Qty:

Description: Pontiac Drop Base Shaker Pan for 1970-72 T/A w/Edelbrock RPM Intake **Requires HP Holley/No Choke**
Item #: BPR-2A
Condition: New
Price: $499.95

Qty:

Description: Lift .447"/.455" Duration 256°/268° RPM Range 1000-5200 Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852) Notice:  All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-221-4
Condition: New
Price: $479.95

Qty:

Description: Lift .462"/.470" Duration 262°/270° RPM Range 1300-5500 Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852) Notice:  All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-222-4
Condition: New
Price: $479.95

Qty:

Description: Lift .477"/.480" Duration 268°/280° RPM Range 1600-5800 Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852) Notice:  All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-223-4
Condition: New
Price: $479.95

Qty:

Description: Lift: .488''/.491'' Duration: 274°/286° RPM Range: 1800-6000 Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852) Notice:  All flat tappet cams require break-in oil and the...More Details »
Item #: BPI-CL-51-224-4
Condition: New
Price: $479.95

Qty:

Description: Lift: .507''/.510'' Duration: 284°/296° RPM Range: 2300-6500 Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852) Notice:  All flat tappet cams require break-in oil and...More Details »
Item #: BPI-CL-51-225-4
Condition: New
Price: $479.95

Qty:

Description: Works great for Pontiac Harmonic Balancer honing and Timing Gear.
Item #: BPI-BC11418
Condition: New
Price: $34.95
Qty:

Description: Works great for Pontiac Cam Gears honing.
Item #: BPI-BC10018
Condition: New
Price: $29.95
Qty:

Description: "Polished" or Black Billet Aluminum Push in Breather for Valve Covers Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD) "(choose your engine size)" CNC Logo engraved right here in our shop
Item #: BPI-S6001-CUIN
Condition: New
Made to order in our own cnc shop. Ships in 3-5 business days
Price: $69.95
as low as: $49.95
2 or more


Description: 1965 tri-power thermostat housing
Item #: AAU-N140A
Condition: New
Price: $43.95
Qty:

Description: 1966 tri-power thermostat housing
Item #: AAU-N140B
Condition: New
Price: $43.95
Qty:

Description: 550-600 HP Pump Gas Complete Top End package with Pontiac 1967-79 400-455 72cc Edelbrock Round Port Heads, Ported to 325+CFM, Complete Pump gas on a 400-428 engine. require high octane for 455 + cu.in. engines
Item #: BPI-TEP-RD-72HR-325
Condition: New
Ship in 2-3 weeks
Price: $5,795.00

Free Shipping!

Description: 550-600 HP Pump Gas Complete Top End package with Pontiac 1967-79 400-455 87cc Edelbrock Round Port Heads, Ported to 325+CFM, Complete
Item #: BPI-TEP-RD-87HR-325
Condition: New
Ship in 2-3 weeks
Price: $5,795.00

Free Shipping!

Items 91-120 of 858