Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
These distributors do not contain an integrated ignition module and must be controlled with an external cd box. Designed for street performance or racing applications. These normally have an...More Details »
**Due to so many variable that can affect flat tappet cam and lifter life from break-in and beyond Flat tappet cams are subject to manufacturer’s warranty ONLY.
This is due to stringent...More Details »
Ram Air Series Cams- Features the Original 744, 067, 068, and 041 Style Reproduction Cams and the Exclusive Ram Air Retrofit Hyd Roller Cams ground by Comp Cams exclusively for Butler Performance
Edelbrock Performer RPM heads produce outstanding horsepower with excellent low speed torque and throttle response. Designed for 1965-79 389-455 c.i.d. Pontiac engines, these heads are patterned...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
The ready to run are exactly as they sound and ready to run with minimal requirements for installation. Inside the housing there is an ignition module that produces a much hotter spark which will...More Details »
EZ-EFI 2.0
• Carb-replacement system supports stock-to-1200 HP engines
• Advanced color touchscreen hand-held doubles as sensor dash
• Setup Wizard guides you through start-up...More Details »
No Image Available
Butler recommended valves- Pontiac Cast Iron Heads (non RAIV/SD) has an install height of 1.600" with stock length valves. More Details »
Fuel Tanks and Tank Kits for late model Pontiacs. Including EFI ready tanks with Pumps and Sending Units
All Tanks Inc Fuel Tanks are E85 Compatible. You Must Source your own Viton Gasket. The...More Details »
Butler Performance is now an authorized reseller of Tremec Transmissions. These are bare transmissions only and ships in 2-3 business days.
Butler Performance Products
Description: Oil Pump Drive Shaft 1/8" longer for IAII AFTERMARKET Blocks ONLY
Does not have tangs to hold shaft in when installed from the bottom, install through dist. hole
Item #: ALL-OPDS-125
Condition:
New
Price: $32.95
Description: Pontiac Engine Cradle 1961-79 w/ Hardware Bolt Kit- Black Powder Coat Finish
1/2" Heavy Duty Casters available as an add-on
Item #: ASP-10144
Condition:
New
Price: $119.95
Description: One-Piece, Aluminum, Water Pump Backing Plate, Two Coolant Inserts, Pontiac V8
Item #: ASP-90019
Condition:
New
Price: $219.95
Description: Pontiac Standard Length High Performance Hardened Oil Pump Driveshaft
For stock blocks only
Does not have tangs to hold shaft in when installed from the bottom, install through dist. hole
Item #: ALL-OPDS-STD
Condition:
New
Price: $34.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits. Now available in CNC Ported Versions
Item #: BPI-HB-002-DP-325-72
Condition:
New
Current estimated ship time is 2-3 weeks or less
Ships1-2 weeks
Price: $3,699.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits. Now available in CNC Ported Versions
Item #: BPI-HB-002-RD-325-72
Condition:
New
Current estimated ship time is 2-3 weeks or less
Ships1-2 weeks
Price: $3,599.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $3,099.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-72
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,999.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-003-RD-72
Condition:
New
Please Call for Availability
Ships 1-2Weeks
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-DP-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Price: $2,899.95
Description: Want to build your own heads or have a shop do it? Let Butler help with the new Head Builder Kits.
Item #: BPI-HB-002-RD-87
Condition:
New
Current estimated ship time is 3-5 Business Days or less
Ships 1-2 weeks
Price: $2,799.95
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM
Condition:
New
Please Call for Availability
Aluminum IAII Builder Kit by Butler, 700+hp Pump Gas 505-535 cu.in. w/ IAII Block, Ready to Assemble
Description: 505-535 cu.in. Crate Engine builder kit form with IA II block, Ready to assemble
Builder Kits are shipped unassembled. Must be assembled by you or your shop
Item #: BP-ENGINE-KIT-IAII-ALM+
Condition:
New
Please Call for Availability
Description: AN Wrench
Single End
Choose -6 to -16 AN
Aluminum
Anodized
Each
Item #: ASP-ALL111
Condition:
New
Price: $16.95
Description: Arnie “the Farmer” Beswick was called “the consummate underdog” by Hot Rod magazine. While there was good reason, there is much more to his unbelievable career.
Item #: BPI-CT664
Condition:
New
Price: $34.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10533
Condition:
New
Price: $69.95
Description: Fits single plane intakes- Aids in atomization and distribution of fuel, especially at lower RPM
Item #: BPI-10633
Condition:
New
Price: $69.95
Description: Pontiac 4-Bolt Crank Drive Mandrel- 1" Shaft- 3/16 Keyway *Will Not Work With Fluid Damper*
Item #: GZM-CM205A
Condition:
New
Price: $149.95
Description: Drop Base Shaker Assembly For Victor Intake and 1970-76 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3A
Condition:
New
Price: $499.95
Description: Drop Base Shaker Assembly For Victor Intake and 1977-79 Firebrd-T/A
**Requires HP Holley / No Choke**
Item #: BPR-3B
Condition:
New
Price: $499.95
Description: Pontiac Drop Base Shaker Pan for 1970-72 T/A w/Edelbrock RPM Intake
**Requires HP Holley/No Choke**
Item #: BPR-2A
Condition:
New
Price: $499.95
Description: Lift .447"/.455"
Duration 256°/268°
RPM Range 1000-5200
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-221-4
Condition:
New
Price: $479.95
Description: Lift .462"/.470"
Duration 262°/270°
RPM Range 1300-5500
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-222-4
Condition:
New
Price: $479.95
Description: Lift .477"/.480"
Duration 268°/280°
RPM Range 1600-5800
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the use...More Details »
Item #: BPI-CL-51-223-4
Condition:
New
Price: $479.95
Description: Lift: .488''/.491''
Duration: 274°/286°
RPM Range: 1800-6000
Includes Cam and Lifter Set (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and the...More Details »
Item #: BPI-CL-51-224-4
Condition:
New
Price: $479.95
Description: Lift: .507''/.510''
Duration: 284°/296°
RPM Range: 2300-6500
Includes Cam and Lifter Kit (Lifter-Butler Spec version of the 852)
Notice: All flat tappet cams require break-in oil and...More Details »
Item #: BPI-CL-51-225-4
Condition:
New
Price: $479.95
Description: Works great for Pontiac Harmonic Balancer honing and Timing Gear.
Item #: BPI-BC11418
Condition:
New
Price: $34.95
Description: Works great for Pontiac Cam Gears honing.
Item #: BPI-BC10018
Condition:
New
Price: $29.95
Description: "Polished" or Black Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
"(choose your engine size)" CNC Logo engraved right here in our shop
Item #: BPI-S6001-CUIN
Condition:
New
Made to order in our own cnc shop. Ships in 3-5 business days
Price: $69.95
as low as: $49.95
2 or more
Description: 1965 tri-power thermostat housing
Item #: AAU-N140A
Condition:
New
Price: $43.95