Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Edelbrock Performer RPM heads produce outstanding horsepower with excellent low speed torque and throttle response. Designed for 1965-79 389-455 c.i.d. Pontiac engines, these heads are patterned...More Details »
The ready to run are exactly as they sound and ready to run with minimal requirements for installation. Inside the housing there is an ignition module that produces a much hotter spark which will...More Details »
Recommended for Hyd Lifter applications where the spring pressures are higher than Flat Tappet. Features full bearing trunnion designs.
**DO NOT TORQUE ROCKER NUTS TO 20lbs AS STATED IN PONTIAC SHOP MANUALS**
Not recommended for Hyd Lifters since the spring pressures are much higher
For enthusiasts who live and breathe the high-performance heritage of the Pontiac V8, showing allegiance is a matter of pride. Butler Performance , the world-renowned authority on Pontiac...More Details »
No Image Available
Butler recommended valves- Pontiac Cast Iron Heads (non RAIV/SD) has an install height of 1.600" with stock length valves. More Details »
Fuel Tanks and Tank Kits for late model Pontiacs. Including EFI ready tanks with Pumps and Sending Units
All Tanks Inc Fuel Tanks are E85 Compatible. You Must Source your own Viton Gasket. The...More Details »
The thermostat housing, or water neck, is a seemingly minor component, but it plays a crucial role in the cooling system of any Pontiac V8. On classic muscle cars, the stock cast iron or...More Details »
Butler Performance is now an authorized reseller of Tremec Transmissions. These are bare transmissions only and ships in 2-3 business days.
The Ultimate Stealth: Pontiac Tri-Power EFI Systems from Butler Performance
Nothing defines the golden age of Pontiac muscle quite like the Tri-Power induction...More Details »
Valley pans do a great job helping eliminate oil consumption through the pcv valve. Butler Performance has it's own custom line of custom Pontiac parts produced and also stocks many from ALL Pontiac, Tomahawk, and more.
Choosing the Right Gaskets
Selecting the right valve cover gaskets starts with understanding how your Pontiac engine is built and how it’s used. Stock stamped covers on street engines...More Details »
Butler Performance Products
Compare to Edelbrock 2057 Power Package
Description: Up to 550 HP & 575 ft.lbs. torque. With just about everything you need to top off your Pontiac. These Top End Kits are performance-proven, complete with Heads, Intake, Cam, Timing Chain,...More Details »
Item #: BPI-TEP-RD-87HR
Condition:
New
Price: $5,495.00
Free Shipping!
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Item #: CCA-BP-RA-067-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 200/210 284/293
Lift .405/.405 @1.5 Ratio
LS 111
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-067-FT-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 200/210 244/254
Lift .405/.405 @1.5 Ratio
LS 111
Hyd. Flat Tappet
Item #: CCA-BP-RA-067-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 212/226
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-068-HR
Condition:
New
Price: $569.95
Description: INT/EXH @.050 212/225 256/268
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-068-FT-CL
Condition:
New
Price: $549.95
Description: INT/EXH @.050 212/225 256/268
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-068-FT
Condition:
New
Price: $299.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR-CL
Condition:
New
Price: $1,229.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR-K
Condition:
New
Price: $1,699.95
Description: The Butler SD Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced from the legendary McKellar #10 Super Duty grind, GM part #541596
Lift with 1.5 ratio...More Details »
Item #: CCA-BP-SD10-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 224/236
Lobe Separation Angle: 115
Hyd. Roller
Item #: CCA-BP-RA-744-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
852B Lifters- Hy-Lift Johnson Brand/Made in the USA
Item #: CCA-BP-RA-FT-744-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
INT/EXH @.050 224/236 268/280
Lift .405/.405 @1.5 Ratio
LS 115
Hyd. Flat Tappet
Item #: CCA-BP-RA-744-FT
Condition:
New
Price: $299.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-CL
Condition:
New
Price: $1,279.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .507/.541
Lift with 1.65 ratio rockers: .557/.595
Duration: 232/241
Lobe Separation Angle: 113
Hyd. Roller
Item #: CCA-BP-RA-041-HR-K
Condition:
New
Price: $1,749.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1969/1970 Ram Air IV factory 345/370hp
Lift...More Details »
Item #: CCA-BP-RA-041-HR
Condition:
New
Price: $569.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT-CL
Condition:
New
Price: $549.95
Description: The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Reproduced factory ID number 9794041 for 400 cu.in., 1968 Ram Air IV. Factory 366 H.P. 400 cu....More Details »
Item #: CCA-BP-RA-041-FT
Condition:
New
Price: $299.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble. -6 Fittings and hose
Item #: BPI-1007FUEL-6
Condition:
New
Price: $149.95
Description: Fuel Pump to Carb inlet kit for RobMc fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble. -8 Fittings and hose
Item #: BPI-1007FUEL-8
Condition:
New
Price: $149.95
Description: Fuel Pump to Carb inlet kit for Holley or Carter fuel pump to Qjet carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1009FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Holley or Carter fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1010FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Edelbrock fuel pump to Qjet carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1011FUEL
Condition:
New
Price: $119.95
Description: Fuel Pump to Carb inlet kit for Edelbrock fuel pump to Dual Inlet Holley carb- includes fittings and hose. Easy to assemble.
Item #: BPI-1012FUEL
Condition:
New
Price: $119.95