Edelbrock Dual-Quad Pontiac Intake Manifold EDL-5450

Pontiac Low Rise 2 x 4 Dual Plane Aluminum Intake w/ Edel.(Carter AFB) bolt pattern **Can't be used with HEI or Holley carbs / Must use AL. valley pan or be modified to use stock/TPP valley pan**

PONTIAC 326-455 V8
PONTIAC P-65 DUAL-QUAD (IDLE-5500 RPM)
Designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V), this manifold is a direct reproduction of the original Edelbrock Pontiac P-65 intake manifold delivering classic Edelbrock performance from off-idle to 5500 rpm. Bosses at the rear of the manifold accommodate brake booster, accessory bracket and throttle linkage. The flanges match the ports on the Edelbrock Performer RPM Pontiac heads for proven performance. Use with Performer-Plus cam #2157 for low-end torque or Torker-Plus cam #5057 for top-end power. Not for HEI distributors. Carb center to carb center: 6-7/16".

Offering a wide selection of multiple carburetor manifolds, or dual-quad designs. The all-new RPM Air-Gap dual-quads are the latest design, featuring an open air space that separates the runners from the hot engine oil for a cooler, denser charge for more power.