Butler Performance Universal Pontiac Head Gasket, Fits all 64' and later 326-455 (Set/2) SPM-19375-2

(0) Reviews: Write first review

SKU: SPM-19375

Universal Pontiac Head Gasket, Fits all 64' and later 326-455 Engines. For use up to 4.191" Bore

Pricing: $77.95

Description

Manufactured exclusively for BP from the original Fitzgerald dies used for GM in the 1960's and 1970's. These head gaskets will crush to approximately .045.

Also has chambers for the 326-389-421 (and Early 1967 400)

If the block has the offset type/location of valve notch then it requires this 19375 gasket. This 19375 gasket also works on a block with the later style valve notches (@ 3:00 and 9:00 locations) OR on a block with no valve notches. It is universal.

Will not work on .060 over 455 4.211 bore

Recommended installation: Spray the metal side lightly with copper coat and let dry about 5 minutes, spray lightly again and let dry. The metal side goes to the block & the composition side goes toward the head. Do not spray the composition side.