Go EFI Tri-Power System by FiTech

Features

• Classic carburetor gold finish.
• Self learning technology for wide range superfast dial in correction.
• Equipped with three 500 CFM throttle bodies.
• Easy tach input, reads tach signal from COIL, HEI, CDI and many other ignition brands.
• Suitable for crate engines and performance builds for up to 600hp.
• Bosch Wideband Oxygen Sensor with mounting kit provides real time fuel map learning!
• For non-boosted engines natural aspirated applications only.
• Wet flow technology with a unique swirl spray annular discharge design that assures complete atomization!
• Bolts onto most 3×2 manifolds with no modifications necessary.
• Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required.

Optional, not included (highly recommended): Linkage Kit for Tri-Power 39610 (Part Number 39611)

Not Included:

This system needs a fuel delivery system to provide 58 PSI of fuel pressure. A Fuel pump, fuel lines, fuel filter, and fuel pressure regulator are needed for this kit. Below is a list of fuel system components that may be needed. See our EFI Solution Systems, Efi Fuel Tanks, or High Pressure Power Surge EFI Pumps for a simple conversion

***Pontiac TriPower conversions***

This has a Holley 2300 pattern and you will need adapter plates to make it work. Recommended to work with a 1966 Tri-Power intake only. See our complete Tri-power EFI system (Coming Soon) for the easiest conversion with all the parts you need to go TriPower EFI

Here are the details of what is needed for a DIY conversion kit:

 FiTech Tripower EFI kit (comes with (x3) efi bodies, gaskets, wiring harness, and handheld)
Customizable Linkage Kit (may need to cut to fit or slightly clearance intake area for linkage)
1966 intake to FiTech Tripower adapters (so you have correct bolt pattern). Have to slightly enlarge the bolt holes on intake side but nothing major. Includes Gaskets. (x3)
Custom laser cut base plates for tripower air filters to fit FiTech EFI (x3)
K&N style reusable air filters (x3)
Chrome Air cleaner lids (x3)
We can supply a 66 intake or use yours (64-65 has different center port so we are developing an adapter for it. Not yet ready)

Butler can also supply an Efi Fuel Tank with Pump, Inline Pump, or Powersurge Tank to get high pressure. Can also supply line kit and regulator.

Fuel inlet lines not included