Go EFI 8, Power Adder System by FiTech, Black Finish

Description

The Go EFI 8 1200 HP (Power Adder Plus) is the ultimate system for the serious power builder. This system features 8 high-flow injectors and is capable of fueling 1200HP! The Go EFI 8 1200HP is our top of the line system and comes with all of the data-logging, and pro-tuning software as standard features. Plus the Annular Discharge design is increased to 20 jet streams to handle the monster flow of this unit!

This system is capable of 25lbs of boost right out of the box and can be used in a blow thru turbo or blower application – or on a single roots style supercharger. You can also run a single stage of wet nitrous and control your A/F as well as ignition timing. **This kit is suitable for higher horsepower engines while equally at home on your daily driver 383.***Works from 250-1200HP! ***

• Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a 4-barrel intake manifold.
• Replacement for any 4-barrel carburetors for engines with 250 HP up to 1200 HP.
• Use the same size air cleaner you would normally use for your 4-barrel carburetor.

Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into older vehicles that do not require emission controls.

Features

• 2.5 BAR internal MAP sensor.
• Suitable for up to 1200hp.
• (8) Flow matched injectors.
• (2) Fan control.
• Blower and turbo ready.
• Support for Nitrous.
• Built-in pressure regulator.
• Ignition timing control.
• Pro-tuning laptop software.
• Matte black finish.

Kit Contents

• (1) Die-cast throttle body.
• (1) O2 bung kit.
• (1) Hand-held controller.
• (1) CTS sensor.
• (1) Hand-held controller cable.
• (1) CTS adapter.
• (1) Windshield mount.
• (1) Mini USB cable.
• (1) 4+2-Pin Connector.
• (1) Return plug.
• (1) O2 sensor.
• (1) Gasket kit.

This system needs a fuel delivery system to provide 58 PSI of fuel pressure. A Fuel pump, fuel lines, fuel filter, and fuel pressure regulator are needed for this kit. Below is a list of fuel system components that may be needed. See our EFI Solution Systems, Efi Fuel Tanks, or High Pressure Power Surge EFI Pumps for a simple conversion