Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Not only are breathers and oil caps necessary for a good performing engine but they can add to the look as well. Shop breathers and oil caps here at Butler.
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
Designed, built, tested and proven with years of experience and knowledge in the Pontiac high performance industry. Our assemblies are put together with parts selected and used specifically in...More Details »
One of the best ways to add style to your engine is with custom valve covers. Butler Performance has a custom line available in Black, Aluminum, or polished as well as many other brands such as PRW and RPC.
Covers for Pontiac GTO, Trans Am, and G8 with GM/LS Based Engines
No Image Available
Butler Performance has built many performance engines over the last three decades. Each of these engines has the benefit of high-quality part combinations that have been engineered and tested in...More Details »
Carb Accessories is where you will find linkage, lines, plates, and more for carburetors and more.
Transmissions varied throughout the years and many have also been swapped so the car model year may not be an accurate guide when ordering. We recommend you verify model number of your transmission and verify spline count before ordering.
Butler can help you make the conversion from 8 bolt to 11 bolt for increased cooling. We also can help you convert from the early 1969 11 bolt with a 4" pump to the more popular 4.5" from 1969 1/2 and later
No Image Available
Over the last couple of years our engine program has evolved, and we are no longer offering custom/built to order engines (short block, long block, or complete engines).
Our Pontiac crate...More Details »
Aluminum D - Port Cylinder Heads
These heads use the stock Pontiac D-Port exhaust port exits for use with standard D-port aftermarket exhaust systems. Performer Pontiac heads are...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
Butler Performance Products
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 64-67, 73-77 (A-BODY)/71-74 (X-BODY) - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-R167H
Condition:
New
Price: $37.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 67-69 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR712P
Condition:
New
Price: $35.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 70-81 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR713P
Condition:
New
Price: $29.95
Description: 1964-77 GM Ball Stud Clutch Z Bar To Frame Bracket
Item #: APE-R167F
Condition:
New
Price: $16.95
Description: Pontiac Clutch Install Kit includes pilot bearing, thrust bearing and pressure plate bolt kit
Item #: BPI-Clutch-Install-Kit
Condition:
New
Price: $94.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-POL
Condition:
New
Price: $49.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 2 3/4, Choose Your Options (Set) BPI-SVC-FAB
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-SVC-FAB
Condition:
New
Contact Us
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 3 1/2, Choose Your Options (Set) BPI-TVC-FAB
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-TVC-FAB
Condition:
New
Contact Us
Description: Pontiac Dipstick (no AC)
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-2
Condition:
New
Price: $19.95
Description: Pontiac Dipstick (no AC) RAW FINISH
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-1
Condition:
New
Price: $14.95
Description: Pontiac Dipstick Tube Installation Tool, Use with N304 or factory block dipstick tubes
Item #: BPI-1001
Condition:
New
Price: $11.95
Description: Pontiac Dipstick Tube-1966-79 Upper Block Tube -Stainless Steel
Item #: AAU-N304
Condition:
New
Price: $29.95
Description: Pontiac A/C Dipstick 1968-79 RAW FINISH
*28 3/4" long from top of bell to tip*
Item #: BPI-9405R-4
Condition:
New
Not Available
Price: $18.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) or 305/350 GM engine Shakers**
Item #: PTF-EP-401BK
Condition:
New
Price: $279.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) or 305/350 GM engine Shakers**
Item #: PTF-EP-401
Condition:
New
Price: $259.95
Description: For use with engines making more than 450hp- Requires taller fiberglass Mega Scoop
Item #: PTF-EP-401T
Condition:
New
Price: $279.95
Description: Keep your engine clean from dust and elements
2mm Plastic Engine Bag, EACH
23" x 17" x 50"
Fits Engine Short Block
Item #: PIO-EB-10-1
Condition:
New
Price: $3.95
as low as: $2.49
5 or more
Description: Fits standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet and Carter AFB carburetors
Item #: RPC-S7903
Condition:
New
Price: $29.95
Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis/70 LeMans, Set BPI-MM5
Description: Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis
Use the original chassis specific frame and motor mounts
Item #: BPI-MM5
Condition:
New
Price: $54.95
Description: Adapt Pontiac engine to Chevy/GM Transmission
Item #: BPI-1034
Condition:
New
Price: $74.95
Description: Features Butler Performance Pontiac Flag Logo Leather Patch on the front
Item #: BPI-HAT-1510
Condition:
New
Price: $29.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ Early 60's 389/421 to adapt from 2 9/16" crank hub to 2 3/4" flywheel
Item #: BPI-1024
Condition:
New
Price: $49.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ early model 2.5 hub cranks to 2.75 flywheel
Item #: BPI-1025
Condition:
New
Price: $29.95
Description: The UVPM (Universal Vacuum Pump Mount) is our most sturdy design bracket available for mounting a Vacuum Pump to your engine or motor plate. This 1/2" thick 6061 T6 Aluminum mount is designed for a...More Details »
Item #: GZM-UVPM102
Condition:
New
Price: $99.95
Description: Complete Pontiac HEI Distributor Kit. Includes Pontiac S3922 HEI Distributor (Black or Red) with integrated coil,Plug Wires (Black or Red), and Wire Separators
Item #: RPC-KIT-DISTR
Condition:
New
Price: $219.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-POL
Condition:
New
Price: $49.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Judge CNC Logo engraved right here in our shop
Item #: BPI-S6001-JUDGE-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Judge CNC Logo engraved right here in our shop
Item #: BPI-S6001-JUDGE-POL
Condition:
New
Price: $49.95