TCI 10" Nitrous Converter- w/Steel Stator & Anti Ballooning Platess TCI-251020
TCI 10" Nitrous Converter w/Steel Stator & Anti Ballooning Plates
Fits GM Turbo Spline Transmissions
4000 RPM Base Stall Range / 4800 RPM Upper Stall Range (If using power adder, refer to upper stall range)
Optimum Vehicle Application: 2800lb, 675cid, 450 HP Nitrous, 3.90 Gear, 14W x 32H x 16, 1400 CFM Fuel Flow, 1400 HP
PRO-X™ Drag Race Torque Converters
Building huge horsepower is fine as long as your drivetrain is up to the task of delivering the power to the pavement. TCI® offers a complete line of premium torque converters built exclusively for use in Top Sportsman, Top Dragster and 10.5 Tire Outlaw classes. Able to handle 500+ c.i., 2500+ horsepower, 3500 RPM applications (including multi-stage, nitrous-assisted, supercharged and twin turbocharged engines), these high strength torque converters are built for most GM, Ford and Chrysler transmissions and bolt up to either six or four-bolt mounting flanges. In addition, the PRO-X™ 9" and 10" Torque Converters utilize the state-of-the-art, proprietary metallic gray HDT Coating™ which enables TCI® converters to operate at lower temperatures and cool down faster.
Bulletproof, Hand-Built Steel Stator Can Be Custom Engineered for Specific Stall Ranges
Billet Mounting Ring Provides Maximum Amount of Surface Mounting Area for Increased Strength
Three Sets of Heavy-Duty Internal Bearings Maximize Load Capacity & Decrease Drag in High HP Applications
Furnace-Brazed & Hand-Brazed Turbine & Pump Assembly Provide Superior Strength Over Competitors “Hand-Tacked” Only Converters
|Stall speed is an appproximation – will vary per CID; dyno torque; HP ratings; power adders, such as turbo(s) amount of boost, blower size & amount of boost, amount of initial NOS applied|
- Item Requires Shipping
- 38.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.