Home - Return to Previous Page
Butler Exclusive Pontiac "067" Hydraulic Roller Retrofit Camshaft Master Kit, 257/265 202/210, .450/.450 HR111
CCA-BP-RA-067-HR-K
The Butler RA Series is an updated cam lobe designed and ground by COMP CAMS exclusively for Butler
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Lift with 1.5 ratio rockers: .450/.450
Lift with 1.65 ratio rockers: .495/.495
Duration: 202/210
Lobe Separation Angle: 111
Hyd. Roller
Was:
$1,589.95
Sale:
$1,430.96
Description
Butler custom cam master kits are designed and tested kits built with the parts we think are best for the application. Each kit has the correct cam/lifter/and spring combination with everything you need to perform a top end performance upgrade without guessing if it will work.
Choice of Hyd. roller lifters
o Morel 5884R
o Johnson 2112-OPR
Timing Set: Pontiac Pro Billet Timing Set
o Billet Gears, 9 Keyway Crank Sprocket w/ Seamed Chain **Hone to fit if needed**
BPI Hydraulic Roller Spring (Cast Iron D-Port)
o Type Dual With Damper O.D. Outer: 1.465" I.D. Outer: 1.091" I.D. Inner: .807" Coil Bind: .950" Seat Load: 140@1.600" Open Load: 350@1.100" Rate (lbs/in): 375 Valve Springs
Valve Springs: EDL-5845 (Cast Iron SD/RAIV and Edelbrock Heads)
o 1.460 in. O.D., 1.200 in. Coil Bind Height
Retainers:
o 10 Degree Chromoly Retainers- For 1.437''-1.500" Diameter Springs
Also includes a pushrod length checking tool for accurate push rod selection and matching locks and valve stem seals
**Stock valley pan will not allow clearance for tie bar on hyd roller lifters. See TPP-0421 or BFA fabricated valley pans.**
Choice of Hyd. roller lifters
o Morel 5884R
o Johnson 2112-OPR
Timing Set: Pontiac Pro Billet Timing Set
o Billet Gears, 9 Keyway Crank Sprocket w/ Seamed Chain **Hone to fit if needed**
BPI Hydraulic Roller Spring (Cast Iron D-Port)
o Type Dual With Damper O.D. Outer: 1.465" I.D. Outer: 1.091" I.D. Inner: .807" Coil Bind: .950" Seat Load: 140@1.600" Open Load: 350@1.100" Rate (lbs/in): 375 Valve Springs
Valve Springs: EDL-5845 (Cast Iron SD/RAIV and Edelbrock Heads)
o 1.460 in. O.D., 1.200 in. Coil Bind Height
Retainers:
o 10 Degree Chromoly Retainers- For 1.437''-1.500" Diameter Springs
Also includes a pushrod length checking tool for accurate push rod selection and matching locks and valve stem seals
**Stock valley pan will not allow clearance for tie bar on hyd roller lifters. See TPP-0421 or BFA fabricated valley pans.**
Details
- CCA-BP-RA-067-HR-K
- CCA-BP-RA-067-HR-K
- Butler Performance
- New
Shipping Information
- Item Requires Shipping
- 15.0 lbs.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!