Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 3 1/2, Choose Your Options (Set) BPI-TVC-FAB

Here's the Tall Fab set — completing the four-way lineup:

Pontiac Custom Fab Aluminum Valve Covers — Raw or Black, 3½" (Set) · BPI-TVC-FAB

Hand-fabricated height and clearance for a roller Pontiac — made in the USA, priced for the build.

Need room for roller rockers or a stud girdle but don't want to jump to billet money? This is the set. Our Tall hand-fabricated aluminum valve covers are welded up in-house and built to order, giving you real valvetrain clearance and the clean fabricated look — all at a price that leaves room in the budget for the rest of the top end.

Where it counts, they're built to seal. Each cover has an extra-thick ¼" gasket rail for a big, flat sealing surface that keeps oil where it belongs. At 3½" tall, this set clears most stud girdles and gives roller rockers the height they need.

What's included

• Matched set of hand-fabricated aluminum valve covers, made to order
• ¼" thick gasket rail for a superior sealing surface
• Set of 5/16" stainless steel bolts
• Oil fill cap, installed (choose one oil fill location per set)

Build them your way

• Finish: raw aluminum or black
• Logo: plain or add your logo — choose from our logo options or CNC engraving
• Breathers / oil fill: we'll drill for breathers and fittings wherever you want them — just enter the locations in the order notes (e.g., "oil fill – driver front, breathers – driver & passenger rear")
• Evac ready: add the Evac Bung & Baffle option for a vacuum/evac system. Covers ship without breather holes when the evac bung is selected — GZ evac kits run a -10AN bung, Butler/Moroso kits a -12AN
• Valve cover gaskets: add a matching set right on the options

Fitment notes — please read before ordering

• Made for the Pontiac V8.
• Clears most stud girdles — the fab set for roller-rocker and girdle setups.
• Will not work with factory A/C brackets.
• May not clear power brake boosters at this height — measure from the valve cover rail on the head to the booster (you need 3" of clearance). If a booster is tight, look at our Short 2¾" fab set.
• Questions on valvetrain clearance or application? Call us before you order.