Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
Pontiac V8 Engine Mount Bolts & Kits
Body by Body — Engine Mount Bolts & Kits for Pontiac V8s
Engine mount bolt kits are chassis parts, not engine parts. What fits a 1964-72 A-body...More Details »
Pontiac V8 Engine Plates & Adaptors
Chassis Hardware — Engine Plates & Adaptors for Pontiac V8s
Engine plates and adaptors hold a Pontiac V8 in place when a side mount will not do...More Details »
Pontiac V8 Evac Pump Kits & Accessories
Pull Vacuum, Seal the Rings — Evac Pump Kits & Accessories for Pontiac V8s
A crankcase evacuation system pulls vacuum on the crankcase...More Details »
Pontiac V8 Exhaust Header Gaskets
Hold the Heat — Exhaust Header Gaskets for Pontiac V8s
Exhaust header gaskets take the worst of it on a Pontiac V8 — full exhaust heat,...More Details »
No Image Available
Pontiac V8 Fans, Shrouds, and Accessories
Move the Air — Fans, Shrouds, and Accessories for Pontiac V8s
A radiator only cools the air you actually pull through it. Fans, shrouds and...More Details »
Pontiac V8 Fender Covers
Protect the Paint — Fender Covers for Pontiac V8s
Fender covers are the cheapest insurance in the shop. A dropped socket or a belt buckle against a painted...More Details »
Pontiac V8 Fender Covers
Cheap Insurance on Good Paint — Fender Covers for Pontiac V8s
A fender cover is cheap insurance on a car you have already spent money painting. It keeps...More Details »
Pontiac V8 FiTech EFI Systems
ECU On the Throttle Body — FiTech EFI Systems for Pontiac V8s
FiTech EFI Systems put the ECU on the throttle body itself. That means no hole in the...More Details »
Pontiac V8 Flexplate/Flywheel Bolts
Behind the Crank — Flexplate/Flywheel Bolts for Pontiac V8s
Flexplate and flywheel bolts tie the rotating assembly to the transmission side of...More Details »
Pontiac V8 Flexplates (Automatic)
Balance First — Flexplates (Automatic) for Pontiac V8s
A flexplate is the one part in an automatic Pontiac that has to agree with your crankshaft...More Details »
Pontiac V8 Flywheels (Manual)
Match the Balance, Then Pick the Material — Flywheels (Manual) for Pontiac V8s
A flywheel on a manual Pontiac does three jobs at once: it carries the...More Details »
Pontiac V8 Freeze Plugs & Block Acc.
Seal It Once — Freeze Plugs & Block Acc. for Pontiac V8s
Freeze plugs and block accessories are the parts nobody thinks about until one lets go....More Details »
Pontiac V8 Fuel Filters
Pre-Pump and Post-Pump — Fuel Filters for Pontiac V8s
Fuel filters are the cheapest insurance in the whole fuel system and the part most often installed in...More Details »
Pontiac V8 Fuel Pumps- In-Tank Carbureted
Quiet and Submerged — Fuel Pumps- In-Tank Carbureted for Pontiac V8s
An in-tank carbureted fuel pump puts the pump inside the tank,...More Details »
Pontiac V8 Fuel Pumps- In-Tank EFI
Inside the Tank — Fuel Pumps- In-Tank EFI for Pontiac V8s
An in-tank EFI fuel pump is the pump a fuel injected Pontiac V8 wants: submerged in fuel...More Details »
Pontiac V8 Fuel Regulators
Controlling the Pump — Fuel Regulators for Pontiac V8s
A fuel pressure regulator is what keeps the pump from overwhelming what it feeds. Too much pressure...More Details »
Pontiac V8 Fuel Tanks-Stock Replacement
Back to Original — Fuel Tanks-Stock Replacement for Pontiac V8s
A stock replacement fuel tank is the correct part for a Pontiac that is...More Details »
No Image Available
Pontiac V8 Full Size/Big Car
Big Car Hardware — Full Size/Big Car for Pontiac V8s
Full size Pontiacs are the Catalina, Bonneville, Grand Prix and 2+2, and their mounts do not follow...More Details »
Pontiac V8 Grommets
Measure the Hole First — Grommets for Pontiac V8s
A valve cover grommet is a two-dollar rubber part that decides whether a breather seals or leaks, and it is the...More Details »
Pontiac V8 Grommets and Rubber Caps
Small Rubber, Big Difference — Grommets and Rubber Caps for Pontiac V8s
Grommets and rubber caps are the small rubber parts that finish a Pontiac...More Details »
Pontiac V8 Guide Plates
Keep the Pushrod Square — Guide Plates for Pontiac V8s
Guide plates hold the pushrods in line so a stud-mounted rocker stays square to the valve. On a...More Details »
Pontiac V8 Harmonic Balancers/Dampers
Read It Right, Hold It Together — Harmonic Balancers/Dampers for Pontiac V8s
A harmonic balancer absorbs the torsional twist the crankshaft...More Details »
Pontiac V8 Hats
Something to Wear on the Way to the Show — Hats for Pontiac V8s
Butler hats are what most people leave here with the first time, and they are the easiest way to fly...More Details »
Pontiac V8 Head Bolt Kits
Read the Casting First — Head Bolt Kits for Pontiac V8s
Head bolt kits for a Pontiac V8 are chosen by cylinder head casting number and year, not by cubic...More Details »
Pontiac V8 Head Stud Kits
Clamp It and Keep It — Head Stud Kits for Pontiac V8s
Head stud kits thread into the block once and stay there, so the nut does the clamping and the block...More Details »
Pontiac V8 Head, Cam, and Valvetrain Tools
Geometry Sets the Result — Head, Cam, and Valvetrain Tools for Pontiac V8s
Head, cam and valvetrain tools cover the half of a Pontiac V8...More Details »
Pontiac V8 Header Bolts
Hot and Hard to Reach — Header Bolts for Pontiac V8s
Header bolts live in the worst place on the engine: red hot, hard to reach, and loosening every heat...More Details »
Pontiac V8 Hi Flow Sending Units
The Restriction Nobody Looks At — Hi Flow Sending Units for Pontiac V8s
A hi flow sending unit replaces the factory tank sender with one that flows...More Details »
Pontiac V8 Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits
Butler's Own Street Ladder — Hi-Torq Hydraulic Flat Tappet Cams and Cam Kits for Pontiac V8s
The Hi-Torq hydraulic flat...More Details »
Pontiac V8 Hi-Torq Street Series Hydraulic Roller Cams
Roller Lift, Street Manners — Hi-Torq Street Series Hydraulic Roller Cams for Pontiac V8s
The Hi-Torq Street Series is...More Details »
Butler Performance Products
Description: Kauffman Tradewind Port Match Service by Butler Performance
Item #: 3102INT-KRE-CRW
Condition:
New
Price: $295.00
Description: Visit our dedicated site, www.Butler-LS.com for LS assemblies and LS Performance Parts
More Details »
Item #: LS ASSEMBLY
Condition:
New
Description: Pontiac Retro-Fit Hydraulic Roller Lifters with updated Pontiac Oil Band Location (Set/16)
Item #: BPI-5884R
Condition:
New
Price: $708.95
Description: Pontiac Retro-Fit Hydraulic Roller Lifters (PAIR)
Item #: BPI-5884-2
Condition:
New
This is the single pair of 5884R
Price: $84.95
Description: Bolt in evac bung with -8AN fitting
Item #: MRA-32-120-1-34-11012
Condition:
New
Price: $109.95
Description: Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*
Item #: OFF-5499
Condition:
New
Please Call for Availability
Free Shipping!
Description: This diagnostic tools lets you check your filter for contaminants.
Item #: BPI-PFM66490
Condition:
New
Price: $59.95
Description: For 3/4 dia Oil Pump Pickups
Item #: BPI-PFM66480
Condition:
New
Price: $21.95
Description: Pilot Bushing Driver, Steel, Black Oxide, 0.590 in ID Pilot Bushings, Each
Item #: ASP-ALL26115
Condition:
New
Price: $32.28
Description: Kit contains 12 in. long strings—two green .001 in. to .003 in., and one red .002 in. to .006 in.—individually packaged inside calibrated sleeves and detailed instructions
Item #: ASP-ALL96475
Condition:
New
Price: $10.77
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114C
Condition:
New
Limited Supply: Only 1 Left!
Price: $177.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum thermostat housing, O-ring Sealed
Item #: CSR-9114BLK
Condition:
New
Not Available
Price: $149.95
Description: 100 Years of Pontiac is here. Get your commemorative shirt from Butler
Item #: BPI-TS-BP1627
Condition:
New
Price: $27.95
Description: 1100+ Hp Capable
Titanium valves
Titanium retainers
PSI or PAC springs
FOR USE ON AFTERMARKET BLOCKS ONLY, recommended 4.310 or larger bores (4.280 minimum)
Requires offset solid roller lifters and shaft rockers
Item #: EDL-77849BP-440
Condition:
New
Price: $11,995.00
Description: NEW EARLY 69 WATER PUMP SHORT HUB 4", ALL PONT V8 (APE)
Gasket not included
Item #: APE-N140NW
Condition:
New
Price: $118.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16C
Condition:
New
Limited Supply: Only 1 Left!
Price: $169.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN16BLK
Condition:
New
Limited Supply: Only 1 Left!
Price: $235.95
Description: Pontiac 1965 389 Chrome Valve Covers (Set)
*hole for 5/8 rubber grommet on pass. side, twist-in cap/ breather in drivers side*
Item #: AAU-N221R
Condition:
New
Price: $137.95
Description: Pontiac 1966 Chrome Valve Covers-set
Pass. side- no hole/ Dr. side- hole for twist-in breather
Item #: AAU-N221T
Condition:
New
Price: $182.95
Description: Lower Stainless Dipstick Tube w/Bracket (When Not Using a Windage Tray)
Item #: BPI-1082
Condition:
New
Price: $24.95
Description: Dipstick Tube for Windage Tray, Stainless Steel
Item #: BPI-1081
Condition:
New
Price: $19.95
Description: Pontiac 2-Groove 1968-70 Crank Pulley-Black Crinkle Powder Coated Finish
Item #: BPI-PLC2B-PC
Condition:
New
Not Available
Price: $144.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN20C
Condition:
New
Not Available
Price: $189.95
Description: Pontiac 326-455 *Not for use with Tri-Power* 360 degree adjustable billet aluminum polished thermostat housing, O-ring Sealed
Item #: CSR-9114AN20BLK
Condition:
New
Not Available
Price: $189.95
Description: Guide plates, Flat, Steel, 3/8 in., Machined for 3/8 in our shop. Pontiac, 389, 400, 421, 428, 455, for EDL Performer Pontiac Head, Set of 8
Item #: BPI-GP-38-8
Condition:
New
Price: $99.95
Description: Pontiac 389-421 1959-65 Dipstick Block Tube- 1 of 3 Pieces For Use w/ N250, N298
Item #: APE-N252
Condition:
New
Price: $22.95
Description: Pontiac 389-421 1964-65 Upper Dipstick Tube- 1 of 3 Pieces For Use w/ N252, N298
Item #: APE-N250
Condition:
New
Price: $59.95
Description: Pontiac 389-421 1965-66 Lower Dipstick Tube For Use With Tray- 1 of 3 Pieces For Use w/ N250,N252
Item #: AAU-N298
Condition:
New
Price: $21.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-BK
Condition:
New
Price: $79.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-3D-POL
Condition:
New
Price: $79.95