Butler Performance Inc. » Butler Performance
Butler Performance, a name synonymous with High Performance, specifically traditional Pontiac engines.
Butler Performance Categories
**Due to so many variable that can affect flat tappet cam and lifter life from break-in and beyond Flat tappet cams are subject to manufacturer’s warranty ONLY.
This is due to stringent...More Details »
Ram Air Series Cams- Features the Original 744, 067, 068, and 041 Style Reproduction Cams and the Exclusive Ram Air Retrofit Hyd Roller Cams ground by Comp Cams exclusively for Butler Performance
Edelbrock Performer RPM heads produce outstanding horsepower with excellent low speed torque and throttle response. Designed for 1965-79 389-455 c.i.d. Pontiac engines, these heads are patterned...More Details »
BP has conducted extensive flow bench, dyno, and track testing with these heads, all resulting in great performance numbers. We have cylinder head packages for any application, from 7-second...More Details »
The ready to run are exactly as they sound and ready to run with minimal requirements for installation. Inside the housing there is an ignition module that produces a much hotter spark which will...More Details »
EZ-EFI 2.0
• Carb-replacement system supports stock-to-1200 HP engines
• Advanced color touchscreen hand-held doubles as sensor dash
• Setup Wizard guides you through start-up...More Details »
Butler recommended valves- Pontiac Cast Iron Heads (non RAIV/SD) has an install height of 1.600" with stock length valves. More Details »
Fuel Tanks and Tank Kits for late model Pontiacs. Including EFI ready tanks with Pumps and Sending Units
Butler Performance is now an authorized reseller of Tremec Transmissions. These are bare transmissions only and ships in 2-3 business days.
XFI 2.0
Delivers Ultimate Control & Adjustability
Sequential or Bank-to-Bank EFI • Trans-Brake Creep Control • Boost Control • Progressive Wet/Dry Nitrous Control; Up To 4...More Details »
Butler Performance Products
Description: Cam Sync HE Sensor w/o gear, Installs in Pontiac distributor hole when using front drive distributor or coil on plug ignition- Black
Item #: LPI-3P0116B
Condition:
New
Price: $449.95
Description:
6X Heads (other numbers available)
Milling optional / additional charge (let us know your desired compression ratio)
Completely ported and polished...More Details »
Item #: CC-00155
Condition:
New
Please Call for Availability
Description: Cast Valve Guides 11/32(.342") ID - .502 OD - 2 3/8" Long/Pont. Cast Iron Heads (Set)
Item #: PEP-C5006B-16
Condition:
New
Price: $26.95
Description: Pontiac Clutch Fork Pivot Stud for Bellhousing, 1967-81
Item #: APE-R167CR
Condition:
New
Price: $14.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 64-67, 73-77 (A-BODY)/71-74 (X-BODY) - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-R167H
Condition:
New
Price: $37.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 67-69 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR712P
Condition:
New
Price: $35.95
Description: Pontiac Clutch Fork Pivot Stud for Block (GM)Z-BAR TO ENGINE 70-81 F-Body - CLUTCH COUNTERSHAFT TO ENGINE (GM)
Item #: APE-FR713P
Condition:
New
Price: $17.95
Description: 1964-77 GM Ball Stud Clutch Z Bar To Frame Bracket
Item #: APE-R167F
Condition:
New
Price: $10.95
Description: Pontiac Clutch Install Kit includes pilot bearing, thrust bearing and pressure plate bolt kit
Item #: BPI-Clutch-Install-Kit
Condition:
New
Price: $92.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac CNC Logo engraved right here in our shop
Item #: BPI-S6001-PONT-POL
Condition:
New
Price: $49.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 2 3/4, Choose Your Options (Set) BPI-SVC-WIN
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-SVC-WIN
Condition:
New
Price: $479.95
Pontiac Custom Fab Aluminum Valve Covers, Raw or Black, 3 3/4, Choose Your Options (Set) BPI-TVC-WIN
Description: Choose all your options to make a custom set of Valve Covers- Logo, Oil Fill, Breathers, and Locations
Hand Fabricated right here in the USA
Oil Fill cap with installation now included
Item #: BPI-TVC-WIN
Condition:
New
Price: $479.95
Description: Pontiac Dipstick (no AC)
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-2
Condition:
New
Price: $19.95
Description: Pontiac Dipstick (no AC) RAW FINISH
*17 3/4" long from top of bell to tip*
Item #: BPI-9405R-1
Condition:
New
Price: $14.95
Description: Pontiac Dipstick Tube Installation Tool, Use with N304 or factory block dipstick tubes
Item #: BPI-1001
Condition:
New
Price: $11.95
Description: Pontiac Dipstick Tube-1966-79 Upper Block Tube -Stainless Steel
Item #: AAU-N304
Condition:
New
Price: $29.95
Description: Pontiac Drop Base Shaker Assembly w/ 3" Cone Shaped Washable Element- For Use w/ Edel Perf RPM and Northwind NW-4150 Intakes & QJET/Holley Carb 1973-79 TA 326-455
**WILL NOT WORK w/ 403(1979) or 301(1980-81) Shakers**
Item #: PTF-EP-401
Condition:
New
Price: $249.95
Description: Keep your engine clean from dust and elements
2mm Plastic Engine Bag, EACH
23" x 17" x 50"
Fits Engine Short Block
Item #: PIO-EB-10-1
Condition:
New
Price: $3.95
as low as: $2.49
5 or more
Description: Fits standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet and Carter AFB carburetors
Item #: RPC-S7903
Condition:
New
Price: $29.95
Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis/70 LeMans, Set BPI-MM5
Description: Pontiac Engine Mount Adapter Kit for 76 & Up Engine in a 69 & Earlier Chassis
Item #: BPI-MM5
Condition:
New
Price: $49.95
Description: The all new Butler Firebird shirt has arrived
Item #: BPI-TS-BP1616
Condition:
New
Price: $27.95
Sale: $20.00
Save: 28%
Save: $7.95
Description: Features Butler Performance Pontiac Flag Logo Leather Patch on the front
Item #: BPI-HAT-1510
Condition:
New
Price: $29.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ Early 60's 389/421 to adapt from 2 9/16" crank hub to 2 3/4" flywheel
Item #: BPI-1024
Condition:
New
Price: $49.95
Description: Pontiac Flywheel/Flexplate Spacer Ring For Use w/ early model 2.5 hub cranks to 2.75 flywheel
Item #: BPI-1025
Condition:
New
Price: $29.95
Description: The UVPM (Universal Vacuum Pump Mount) is our most sturdy design bracket available for mounting a Vacuum Pump to your engine or motor plate. This 1/2" thick 6061 T6 Aluminum mount is designed for a...More Details »
Item #: GZM-UVPM102
Condition:
New
Price: $99.95
Description: Hand Made Laser Etched Wooden Keychain with Butler Logo on the back of all the styles
Item #: BPI-Keychain
Condition:
New
Price: $8.95
Description: Complete Pontiac HEI Distributor Kit. Includes Pontiac S3922 HEI Distributor (Black or Red) with integrated coil,Plug Wires (Black or Red), and Wire Separators
Item #: RPC-KIT-DISTR
Condition:
New
Price: $219.95
Description: "Black" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-BK
Condition:
New
Price: $49.95
Description: "Polished" Billet Aluminum Push in Breather for Valve Covers
Fits valve covers with 1.25" hole using grommet # RPC-S4878 (1" ID/ 1.25" OD)
Pontiac Indian CNC Logo engraved right here in our shop
Item #: BPI-S6001-INDIAN-POL
Condition:
New
Price: $49.95